Fluke i410

Fluke i410 – Overview

The Fluke i410 is a current clamp accessory that lets digital multimeters measure both AC and DC currents without breaking the circuit. Its Hall-effect sensor delivers up to 400 A, with a 1 mV per amp output for easy reading. Designed for field and lab use, it features zero-adjustment, a long battery life, and wide compatibility. Ideal for automotive, industrial, or electrical maintenance work where you need reliable, non-intrusive current measurement.

Key Features

• Measures AC and DC current from 1 A to 400 A

• Works down to 0.5 A in usable range

• Hall-effect probe with 1 mV per amp output

• Zero-error adjustment (zero-offset control)

• CAT III 600 V safety rating

• 30 mm (single conductor) or dual conductors up to 25 mm each

• Long battery life (9 V battery, ~60 hours)

• Long output cable (~1.6 meters) with shrouded banana plug ends

Technical Specifications

• Model: Fluke i410

• Current Range (Nominal): 1 to 400 A (AC/DC)

• Lowest Measurable: ~0.5 A

• Basic Accuracy: ±(3.5 % + 0.5 A) over specified range

• Frequency Range: DC up to ~3 kHz for AC measurements

• Output: 1 mV per amp (AC or DC)

• Maximum Rated Voltage: 600 V (CAT III)

• Maximum Conductor Diameter: 30 mm for one conductor; when measuring two conductors at once, up to 25 mm each

• Zero-offset Adjustment: Yes

• Cable Length: ~1.6 m (≈ 5.25 ft)

• Battery: 9 V (alkaline)

• Estimated Battery Life: ~60 hours typical continuous use

• Weight / Size: approx. 0.5 kg; clamp body dimensions ~209 × 78 × 48 mm

• Environmental: Operating from -10 °C to +50 °C; storage wider ranges; humidity and altitude per CAT III standards

Applications

• Measuring current in circuits without interrupting them (e.g. panel, starter, alternator, motor loads)

• Diagnostics in both AC and DC systems (solar, battery backup, automotive)

• Using with multimeters or scopes that accept banana plug inputs for current monitoring

• Industrial maintenance and troubleshooting

Why Choose Fluke i410

• Enables safe, non-intrusive current measurement both AC & DC

• Good accuracy with handy calibration features

• Fits around thick conductors thanks to large jaw opening

• Widely compatible output that works with many meters

Order Now

The Fluke i410 AC/DC Current Clamp is available for purchase. Ships worldwide.

New:

New product in original sealed packaging. The product may be of an older version or design. Packaging may show markings, discoloration, or signs of wear due to storage.

Refurbished:

Refurbished product fully tested, cleaned, and verified for proper operation. Not in original packaging. The item may show minor cosmetic signs resulting from previous handling or use.

Warranty:

DDPARTSSOLUTION Warranty: 1 Year.

Manufacturer’s warranty and support DO NOT apply.