GE Fanuc
GE Fanuc PLCs now Emerson, allow total migration from the original General Electric Series Six PLC to the Series 90-30, Series 90-70 and finally to the Rx3i Rx7i Pacsystems. GE Automation & Control programming software was formally known as Cimplicity but now uses the family name of Proficy Machine Edition as well as PE for the HMI. Intellution FIX32, iFix and i Historian were all converted to the GE -IP family of software named Proficy.
Ctrl+F to search the Part No. you are looking for | Send inquiries for more details.
sales@ddpartssolution.com
| IC660BLM508 | Bus Terminator 75 Ohm (Qty 4) |
| IC660BLM506 | Bus Terminator 150 Ohm (Qty 4) |
| IC660BLM507 | Block Puller |
| IC660BSM120 | Bus Switching Module 115Vac/125Vdc |
| IC660BSM021 | Bus Switching Module 24/48Vdc |
| IC660ELB931 | PCI interface card for Genius LAN interface. Card has the same functionality for PC Control and HMI applications. Limited driver support in first release but a toolkit is available. Supported by PC Control. OEM License agreement available that in |
| IC660BBD101 | Block 115Vac I/O Low Leakage 8 Circuits |
| IC693CMM321 | Block 115Vac/125Vdc Low Leak Isol I/O, w/Failed Sw Diag, 8 Ckt |
| IC660BBS103 | Block 115Vac/125Vdc Low Leak Isol I/O, w/o Failed Sw Diag, 8 Ckt |
| IC660BBR100 | Block Relay Output Normally Closed 16 Circuits. Module is not UL approved. |
| IC660BRD020 | Genius 24/48Vdc Source Block for Redundancy T Output Configurations |
| IC660BBR101CA | Conformal Coated Block Relay Output Normally Open 16 Circuits |
| IC660BBD110 | Block 115Vac Input 16 Circuits |
| IC660BBR101 | Block Relay Output Normally Open 16 Circuits. Module does not have UL approval. |
| IC660BBD021 | Block 24/48Vdc Sink I/O 16 Circuits, 3 Wire Sensor Compatible |
| IC660BBD020 | Block 24/48Vdc Source I/O 16 Circuits, 3 Wire Sensor Compatible |
| IC660BBD023 | Block 24Vdc Sink I/O 16 Circuits, 2/3 Wire Sensor Compatible |
| IC660BBD022 | Block 24Vdc Source I/O 16 Circuits, 2/3 Wire Sensor Compatible |
| IC660BBD022CA | Conformal Coated. Genius Block 24Vdc Source I/O 16 Circuits, 2/3 Wire Sensor Compatible |
| IC660BBD020CA | 24/48VDC Genius SOURCE BLOCK CONFORMAL COATED |
| IC660BRD025 | Genius 5/12/24VDC Sink Block for Redundancy T Output Configurations |
| IC660ELB921 | Single-slot PCIM (XT/AT Interface Board) 1-channel |
| IC660BBA100 | Block 115Vac Analog 4 Inputs / 2 Outputs |
| IC660BBA106 | Block 115Vac/125Vdc Analog Current Source 6 Inputs |
| IC660BBD024 | Block 12/24Vdc Source I/O 32 Circuits |
| IC660BBA020 | Block 24/48Vdc Analog 4 Inputs / 2 Outputs |
| IC660BBA026 | Block 24/48Vdc Analog Current Source 6 Inputs |
| IC660BBD025 | Block 5/12/24Vdc Sink I/O Block 32 Circuits |
| IC660BRD024 | Genius 12/24VDC Source Block for Redundancy T Output Configurations |
| IC660BBA023CA | Block 24/48VdcThermocouple Input 6 Channels, conformal coated |
| IC660BBA026CA | 24/48Vdc Genius Block Analog Current Source 6 Inputs Conformal Coated. |
| IC660BBA024CA | 24/48VDC CUR SCR ALG 4IN/2OUT CONF COAT GENIUS BLOCK |
| IC660ELB922 | Single-slot PCIM (XT/AT Interface Board) 2-channel |
| IC660BBA104 | Block 115Vac/125Vdc Analog Current Source 4 Inputs / 2 Outputs |
| IC660EBA100 | Electronic Assembly for IC660BBA100 |
| IC660EBA025 | Electronic Assembly for IC660BBA025 |
| IC660EBA026 | Electronic Assembly for IC660BBA026 |
| IC660EBD020 | Electronic Assembly for IC660BBD020 |
| IC660EBD022 | Electronic Assembly for IC660BBD022 |
| IC660EBD024 | Electronic Assembly for IC660BBD024 |
| IC660TBA021 | Terminal Assembly for IC660BBA021 |
| IC660TBA024 | Terminal Assembly for IC660BBA024 |
| IC660TBA025 | Terminal Assembly for IC660BBA025 |
| IC660TBA026 | Terminal Assembly for IC660BBA026 |
| IC660TBD022 | Terminal Assembly for IC660BBD022 |
| IC660TBD023 | Terminal Assembly for IC660BBD023 |
| IC660TBD024 | Terminal Assembly for IC660BBD024 |
| IC660TBR101 | Terminal Assembly for IC660BBR101 |
| IC660BBA024 | Block 24/48Vdc Analog Current Source 4 Inputs / 2 Outputs |
| IC660BBD120 | Block High Speed Counter |
| IC660BBA101 | Block 115Vac/125Vdc RTD Input 6 Channels |
| IC660BBA021 | Block 24/48Vdc RTD Input 6 Channels |
| IC660BBA021CA | 24/48VDC RTD BLOCK |
| IC660BBA105 | Block 115Vac/125Vdc Analog Current Source 6 Outputs |
| IC660BBA025 | Block 24/48Vdc Analog Current Source 6 Outputs |
| IC660BBA103 | Block 115Vac/125Vdc Thermocouple Input 6 Channels |
| IC660BBA023 | Block 24/48VdcThermocouple Input 6 Channels |
| IC660BPM100 | Block PowerTRAC 115Vac/125Vdc Power |
| IC200UEI008 | VersaMax Micro Expansion 8 point (8) 24VDC In, 24VDC Power Supply (includes IC200CBL501). |
| IC200UEO108 | VersaMax Micro Expansion 8 Output Expansion 24VDC Sink Output, 24VDC Power Supply (includes IC200CBL501) |
| IC200UEO008 | VersaMax Micro Expansion 8 Output Expansion (8) 24VDC Outputs with ESCP, 24VDC Power Supply (includes IC200CBL501) |
| IC200ACC404 | VersaMax Micro 14, 23 and 28 spare parts kit. Two terminal strips and four plastic doors and four covers. |
| IC200ACC415 | VersaMax Micro and Nano RS-232 to RS-485 Converter requires IC200CBL500 or equivalent. |
| IC200UER008 | VersaMax Micro Expansion 8 Output Expansion (8) Relay Outputs, 24VDC Power Supply (includes IC200CBL501) |
| IC200UEC008 | VersaMax Micro Expansion 8 point combination (4) 24VDC In, (4) 24VDC Output Source with ESCP, 24VDC Power Supply (includes IC200CBL501). |
| IC200UEC108 | VersaMax Micro Expansion 8 point combination (4) 24VDC In, (4) 24VDC Outsink outputs, 24VDC Power Supply (includes IC200CBL501). |
| IC200USB001 | Micro Plus 20/40/64, RS-232 communications option board with (2) 0 - 10VDC analog input channels built-in. The option board also supports program storage memory module. Compatible with VersaMax Micro Plus 20/40/64 only. |
| IC200USB002 | VersaMax Micro 20/40/64, RS-485 communications option board with (2) 0 - 10VDCanalog input channels built-in. The option board also supports program storage memory module. Compatible with VersaMax Micro 20/40/64 only. |
| IC200UUB001 | VersaMax Micro 20/40/64, USB Slave communications option board. The option board also supports program storage memory module. Compatible with VersaMax Micro 20/40/64 only. |
| IC200UEI016 | VersaMax Micro Expansion 16 point Input (16) 24VDC In, 24VDC Power Supply (includes IC200CBL501). |
| IC200UEC208 | VersaMax Micro Expansion 8 point combination (4) 24VDC In, (4) Relay Output, 24VDC Power Supply (includes IC200CBL501). |
| IC200ACC402 | VersaMax Micro 14, 20, 23 and 28 spare Removable Terminal Strips, 10 per pack |
| IC200UEM001 | Micro Plus 20/40/64 Ethernet module. The Ethernet module is compatible with SRTP and supports up to 4 connections. Module can also be configured for Modbus TCP (server). |
| IC200UEX015 | 14 point Exp (8) 12VDC In, (6)12VDC Out, 12VDC Power Supply (includes IC200CBL501) |
| IC200UEX014 | 14 point Exp (8) 24VDC In, (6)24V DC Out, 24VDC Power Supply (includes IC200CBL501) |
| IC200UEX013 | 14 point Exp.(8) 12VDC In, (6) Relay Out, 12VDC Power Supply (includes IC200CBL501) |
| IC200UEX011 | 14 point Exp.(8) 24VDC In, (6) Relay Out, 120V/240AC Power Supply (inc ludes IC200CBL501) |
| IC200UEX012 | 14 point Exp.(8) 24VDC In, (6) Relay Out, 24VDC Power Supply (includes IC200CBL501) |
| IC200UEO116 | VersaMax Micro Expansion 16 Output Expansion (16) 24VDC Sink Outputs, 24VDC Power Supply (includes IC200CBL501) |
| IC200UER016 | VersaMax Micro Expansion 16 Output Expansion (16) Relay Outputs, 24VDC Power Supply (includes IC200CBL501). |
| IC200UEO016 | VersaMax Micro Expansion 16 point (16) 24VDC Source ESCP Outputs, 24VDC Power Supply (includes IC200CBL501) |
| IC200UEX122 | 14 point Exp (8) 24VDC In, (6)24V DC Out with ESCP, 24VDC Power Supply (includes IC200CBL501) |
| IC200UDD112 | 14 point PLC,(8) 12VDC In, (6) 12VDC Out at 0.70 A, 12VDC Power Suppl y |
| IC200UEX010 | 14 point expansion. (8) 120VAC In, (6) 120VAC Out, 120/240VAC Power S upply. (includes IC200CBL501) |
| IC200UEX009 | 14 point expansion. (8) 120VAC In, (6) Relay Out (2 at 10 amp and 4 a t 2 amp), 120/240VAC Power Supply. (includes IC200CBL501) |
| IC200UER508 | Isolated 5 amp, 8 point relay output expansion module, requires 24VDC power supply. Module is not UL approved. |
| IC200UDR003 | 14 point PLC, (8) 12VDC In, (6) Relay Out, 12VDC Power Supply |
| IC200UDD104 | 14 point PLC,(8) 24VDC In, (6) 24VDC Out (2) 1.0 A, (4) 0.5A, 24VDC Po wer Supply |
| IC200UDR002 | 14 point PLC,(8) 24VDC In, (6) Relay Out, 24VDC Power Supply |
| IC200UEX624 | VersaMax Micro 4 channel Analog input expansion. (4) Analog inputs, 24VDC Power Supply (*includes IC200CBL501) |
| IC200UDR001 | 14 point PLC,(8) 24VDC In, (6) Relay Out,120V/240 AC Power Supply |
| IC200UDD020 | Versamax Micro 20 point PLC,(12) 24VDC In, (8) 24VDC Outputs with ESCP protection, 24VDC Power Supply. (1) serial port and (1)optional communication port. Requires Machine Edition 5.7 or higher. Battery (IC200ACC414) is required for data retentio |
| IC200UDD220 | VersaMax Micro 20 point PLC,(12) 24VDC In, (8) 24VDC Sink Outputs, 24VDC Power Supply. (1) serial port and (1)optional communication port. Requires Machine Edition 5.7 or higher. Battery (IC200ACC414) is required for data retention. Battery not i |
| IC200UDR120 | VersaMax Micro 20 point PLC,(12) 24VDC In, (8) Relay Out, 120/240VAC Power Supply. (1) serial port and (1)optional communication port. Requires Machine Edition 5.7 or higher. Battery (IC200ACC414) is required for data retention. Battery not inc |
| IC200UDR020 | VersaMax Micro 20 point PLC,(12) 24VDC In, (8) Relay Out, 24VDC Power Supply. (1) serial port and (1)optional communication port. Requires Machine Edition 5.7 or higher. Battery (IC200ACC414) is required for data retention. Battery not included. |
| IC200UEX213 | 28 point expansion. (16) 12VDC In, (12) Relay Out, 12VDC Power Supply (included IC200CBL501) |
| IC200UAA003 | 14 point PLC, (8) 120VAC In, (6) 120VAC Out, 120V/240VAC Power Supply |
| IC200UAR014 | 14 point PLC, (8) 120VAC In, (6) Relay Out (2 at 10 amp and 4 at 2 amp ), 120V/240VAC Power Supply |
| IC200ACC405 | VersaMax Micro 64 and Micro 40 spare parts kit. Kit includes (5) Micro 64 terminal blocks, (5) Micro 40 terminal blocks and (5) Micro 64 terminal block covers. |
| IC200UEX215 | 28 point expansion. (16) 12VDC In, (12) 12 VDC Out, 12VDC Power Suppy (includes IC200CBL501) |
| IC200UEX222 | 28 point expansion. (16) 24VDC In, (12) 24VDC Out with ESCP, 24VDC Po wer Supply (includes IC200CBL501) |
| IC200UEX214 | 28 point expansion. (16) 24VDC In, (12) 24VDC Out, 24VDC Power Supply (includes IC200CBL501) |
| IC200UEX211 | 28 point expansion. (16) 24VDC In, (12) Relay Out, 120V/240AC Power S upply (includes IC200CBL501) |
| IC200UEX212 | 28 point expansion. (16) 24VDC In, (12) Relay Out, 24VDC Power Supply (included IC200CBL501) |
| IC200UEX616 | 6 channel Analog expansion. (4) Analog inputs & (2) Analog outputs, 1 2VDC Power Supply (includes IC200CBL501) |
| IC200UEX626 | 6 channel Analog expansion. (4) Analog inputs & (2) Analog Outputs, 2 4VDC Power Supply (*includes IC200CBL501) |
| IC200UEX636 | 6 channel Analog expansion. (4) Analog inputs & (2) Analog outputs. 120/240 VAC Power Supply (includes IC200CBL501) |
| IC200UEX724 | RTD expansion module for VersaMax Micro Pt 100, -100 to +600 C-150 to +1050 F 2 and 3 wire support. Channel update is 141/563 ms (selectable) for all channels |
| IC200UEX210 | 28 point expansion. (16) 120VAC In, (12) 120VAC Out, 120/240VAC Power Supply. (Includes IC200CBL501) |
| IC200UEX209 | 28 point expansion. (16) 120VAC In, (12) Relay Out (2 @ 10 amp & 10 @ 2 amp), 120/240VAC Power Supply. (includes IC200CBL501) |
| IC200UEX734 | RTD expansion module for VersaMax Micro Pt 100, -100 to +600 C-150 to +1050 F 2 and 3 wire support. Channel update is 141/563 ms (selectable) for all channels |
| IC200UDR006 | 28 point PLC, (16) 12VDC In, (12) Relay Out, 12VDC Power Supply. Batt ery (IC200ACC403) is required for long term data rentntion and Real Ti me Clock. Battery not included. |
| IC200UDD212 | 28 point PLC,(16) 12VDC In, (12) 12VDC Out 0.70 A, 12VDC Power Supply . Battery (IC200ACC403) is required for data retention. Battery not i ncluded. |
| IC200UDR010 | 28 point PLC,(16) 24VDC In, (11) Relay Out, (1) 24VDC Out, 24VDC Power Supply. Battery (IC200ACC403) is required for data retention. Batter y not included. |
| IC200UDD110 | 28 point PLC,(16) 24VDC In, (12) 24VDC Out (6) 1.0 A, (6) 0.5A, 24VDC Power Supply. Battery (IC200ACC403) is required for data retention. B attery not included. |
| IC200UEX824 | VersaMax Micro 4 channel Thermocouple/mV input expansion module. Supports Type K,J,E,S,T,B,N,-/+50mV,-/+100mV inputs, 12bit resolution. Power source required for expansion module is 24VDC. |
| IC200UDR005 | 28 point PLC,(16) 24VDC In, (11) Relay Out, (1) 24VDC Out, 120V/240AC Power Supply. Battery (IC200ACC403) is required for data retention. B attery not included. |
| IC200UEX726 | RTD expansion module for VersaMax Micro Pt 100, -100 to +600 C-150 to +1050 F 2 and 3 wire support and 2 analog output voltage and current. |
| IC200UDD120 | 28 point PLC,(16) 24VDC In, (12) 24VDC Out ESCP(2 at 1.0 amp and 10 at 0.70 amp), 24VDC Power Supply. Battery (IC200ACC403) is required for data retention. Battery not included. |
| IC200UAA007 | 28 point PLC,(16) 120VAC In, (12) 120V/240AC Out, 120V/240AC Power Sup ply. Battery (IC200ACC403) is required for data retention. Battery no t included. |
| IC200UDR140 | VersaMax Micro 40 point PLC,(24) 24VDC In, (16) Relay Out, 120/240VAC Power Supply. (1) serial port and (1)optional communication port. Requires Machine Edition 5.7 or higher. Battery (IC200ACC414) is required for data retention. Battery not inc |
| IC200UEX736 | RTD expansion module for VersaMax Micro Pt 100, -100 to +600 C-150 to +1050 F 2 and 3 wire support and 2 analog output voltage and current. |
| IC200UAR028 | 28 point PLC,(16) 120VAC In, (12) Relay Out (2 at 10 amp and 10 at 2 a mp) 120V/240AC Power Supply. Battery (IC200ACC403) is required for dat a retention. Battery not included. |
| IC200UEX826 | VersaMax Micro 4 channel Thermocouple/mV input and 2 channels of analog output expansion module. Supports Type K,J,E,S,T,B,N,-/+50mV,-/+100mV inputs, 12bit resolution inputs and 0 to 10VDC or 0 to 20mA outputs. Power source required for expansion mo |
| IC200UDR228 | 28 point PLC,(16) 24VDC In, (11) Relay Out, (1) 24VDC Out, 12/24VDC Power Supply Battery (IC200ACC403) is required for data retention. 140mA 24VDC user supply available. Battery not included. |
| IC200UDD040 | VersaMax Micro 40 point PLC,(24) 24VDC In, (16) 24VDC Outputs with ESCP protection, 24VDC Power Supply. (1) serial port and (1)optional communication port. Requires Machine Edition 5.7 or higher. Battery (IC200ACC414) is required for data retenti |
| IC200UDD240 | VersaMax Micro 40 point PLC,(24) 24VDC In, (16) 24VDC Sink Outputs, 24VDC Power Supply. (1) serial port and (1)optional communication port. Requires Machine Edition 5.7 or higher. Battery (IC200ACC414) is required for data retention. Battery no |
| IC200UDR040 | VersaMax Micro 40 point PLC,(24) 24VDC In, (16) Relay Out, 24VDC Power Supply. (1) serial port and (1)optional communication port. Requires Machine Edition 5.7 or higher. Battery (IC200ACC414) is required for data retention. Battery not included |
| IC200UDR440 | VersaMax Micro 40 point PLC,(24) 24VDC In, (16) Relay Out, 12/24VDC Power Supply. (1) serial port and (1)optional communication port. Requires Machine Edition 5.7 or higher. Battery (IC200ACC414) is required for data retention. Battery not inclu |
| IC200UMM002 | VersaMax MicroMotion, 2 independent axis, 24VDC powered. Compatible with VersaMax Micro 20/40/64 and QuickPanel Control or standalone. Requires firmware 3.8 and above on Micro 20/40/64. |
| IC200UEX364 | VersaMax Micro 64 point expansion (40) 24VDC inputs, 24VDC sink outputs, 24VDC power supply. Compatible with Micro 20/40/64 revision -Bx hardware only version 4.0 firmware and above. |
| IC200UEX264 | VersaMax Micro 64 point expansion (40) 24VDC inputs, 24VDC source outputs with ESCP, 24VDC power supply. Compatible with Micro 20/40/64 revision -Bx hardware only version 4.0 firmware and above. |
| IC200UEX064 | VersaMax Micro 64 point expansion (40) 24VDC inputs, relay outputs, 24VDC power supply. Compatible with Micro 20/40/64 revision - Bx hardware only version 4.0 firmware and above. |
| IC200UEX164 | VersaMax Micro 64 point expansion (40) 24VDC inputs, relay outputs, AC power supply. Compatible with Micro 20/40/64 revision -Bx hardware only version 4.0 firmware and above. |
| IC200UMM102 | VersaMax MicroMotion, 2 independent axis, 120/240VAC powered. Compatible with VersaMax Micro 20/40/64 and QuickPanel Control or standalone. Requires firmware 3.8 and above for Micro20/40/64. |
| IC200UAL004 | 23 point PLC, (13) 12VDC In, (10) Relay Out, (2) Analog In and (1) Ana log Out, 12VDC Power Supply, Battery (IC200ACC403) is required for lon g term data rentntion and Real Time Clock. Battery not included. |
| IC200UAL005 | 23 point PLC, (13) 24VDC In, (1) 24VDC Out, (9) Relay Out,(2) Analog I n and (1) Analog Out, 24VDC Power Supply, Battery (IC200ACC403) is req uired for long term data rentntion and Real Time Clock. Battery not i ncluded. |
| IC200UAL006 | 23 point PLC,(13) 24VDC In, (9) Relay Out, (1) 24VDC Out, (2) Analog I n and (1) Analog Out, 120V/240AC Power Supply. Battery (IC200ACC403) is required for data retention. Battery not included. |
| IC200UDD164 | VersaMax Micro 64 point PLC,(40) 24VDC In, (24) 24VDC Sink Output, 24VDCpower supply. (1) serial port and (1)optional communication port. |
| IC200UDD064 | VersaMax Micro 64 point PLC,(40) 24VDC In, (24) 24VDC source Out ESCP, 24VDC Power Supply. (1) serial port and (1)optional communication port. |
| IC200UDR164 | VersaMax Micro 64 point PLC,(40) 24VDC In, (24) Relay Out, 115/240VAC Power Supply. (1) serial port and (1)optional communication port. |
| IC200UDR064 | VersaMax Micro 64 point PLC,(40) 24VDC In, (24) Relay Out, 24VDC Power Supply. (1) serial port and (1)optional communication port. |
| IC200NDR001 | 10 point PLC,(6) 24VDC In, (4) Relay Out, 24VDC Power Supply |
| IC200NDD010 | 10 point PLC, (6) 12VDC In, (4) 12VDC Out, 12VDC Power Supply |
| IC200NDR010 | 10 point PLC, (6) 12VDC In, (4) Relay Out, 12VDC Power Supply |
| IC200NDD101 | 10 point PLC, (6) 24VDC In, (4) 24VDC Out, 24VDC Power Supply |
| IC200NAL110 | 10 point PLC, (6) 12VDC in, (4) Relay Out, (1) Analog Input (0-10VDC, 8 bit), 12VDC Power Supply |
| IC200NAL211 | 10 point PLC, (6) 24VDC In, (4) Relay Out, (1) Analog Input (0-10VDC, 8 bit), 24VDC Power Supply |
| 8605-FT-TC | Field terminal, thermocouple |
| 8607-FT-TC | FIELD TERM 8CH WITH T/C |
| 8608-FT-NI | FIELD TERM NON-INCENDIVE 8CH |
| 8623-FT-IS | IS Field terminal for 8220-DI-IS 16 ch DI & V/Pot inputs |
| 8624-FT-IS | IS Field terminal with loop-disconnect for 8-channel DI only |
| 8622-FT-IS | IS Field terminal, loop-disconnect (not for 8 channel DI) |
| 8626-FT-IS | IS Field terminal, RTD |
| 8604-FT-FU | Field terminal, fused |
| 8611-FT-FU | Field terminal, non-arcing, fused (Div 2) |
| 8617-FT-NI | Field Terminal, non-incendive, for 16 ch DI |
| 8603-FT-FU | Field terminal, non-incendive, fused (Div 2) |
| 8612-FT-NA | FLD TERM 16CH NA |
| MA15/D/1/SI | AC15AMP PWR SRG PROTECT (120AC) |
| MA15/D/2/SI | AC15AMP PWR SRG PROTECT (240AC) |
| 8618-FT-MT | 16-pin Mass Termination Assembly (Div 2) |
| 8620-FT-MT | 8620 FIELD TERMINAL ASSEMBLY |
| 8619-FT-MT | 44-pin Mass Termination Assembly (Div 2) |
| 8616-FT-FU | FTA FUSED TERMINAL ASSEMBLY |
| 8031-CE-LH | IS Carrier extender, left hand |
| 8030-CE-RH | IS Carrier extender, right hand |
| 8650-FT-PX | 32-channel PX/Switch FTA for 8125/7 |
| 8724-CA-PS | IS module power supply carrier |
| 8723-CA-RB | Railbus isolator carrier (needed with all 2/1 systems) |
| 8725-CA-RB | Railbus isolator carrier with PFM |
| 8021-CE-LH | Carrier extender, left hand |
| 8020-CE-RH | R-HAND EXT. CARRIER |
| BQ2320-ACC | PWR SUPP MOUNTING KIT |
| 8717-CA-PS | 8910-PS-DC only Carrier |
| 8090-CC-66 | CARRIER EXT CBL 66 CM |
| 8715-CA-BI | BIM only carrier, DB-9 connectors; Profibus & MODBUS LANs |
| 8410-NS-PS | Node services power supply monitor |
| 8410-MO-PF-HN | Node services power supply monitor - Honeywell |
| 8718-CA-NS | BIM & Node Serices Carrier, DB-9 for Profibus & Modbus |
| 2981486 | Safety Relay |
| 8091-CC-02 | CARRIER EXT CBL 2 M ** |
| 8720-CA-04 | 4 module IS carrier |
| 8710-CA-04 | 4 module carrier |
| DNR120AS12-I | 12V, 10A POWER SUPPLY |
| DNR240PS24-I | FIELD PSU 24VDC 10A |
| 8109-DI-DC | 8-Channel DI, 24VdC isolated, sinking |
| IC-8588-SW-FT-DT | Fault Tolerant Ethernet Application for Redundant Host Computers |
| 8112-DI-AC | 8-channel DI, 115Vac non-isolated, module powered |
| 8113-DI-AC | 8-channel DI, 230Vac isolated, sinking |
| 8114-DI-AC | 8-channel DI, 230Vac non-isolated, module powered |
| 8110-DI-DC | 8-channel DI, 24Vdc non-isolated, module powered |
| 8111-DI-AC | 8-channel DI, 115Vac isolated, sinking |
| NPORT-6110 | Ethernet to RS-232/485/422 Modbus Gateway |
| 8456-SW-CF | MTL8000 Configurator Software (Software only) |
| 8752-CA-NS | PAC8000 Universal Node Services Carrier |
| 8118-DO-AC | 8-channel DO, 20-250Vac isolated, unpowered |
| MTL8916 | 24VDC OVERVOLT PROTECTOR |
| 8727-CA-08 | 8 module IS carrier |
| 8701-CA-BI | MULTI-BIM CARRIER |
| 8116-DO-AC | 8-channel DO, 20-250Vac non-isolated, module powered |
| 8729-CA-08 | IS Carrier, 8 module, 64-address system |
| 8094-CC-400 | CARRIER EXT CBL 158in ** |
| 8461-SW-MT | "Modbus (RTU, ASCII, TCP, Enron)" |
| 8707-CA-08 | 8 module carrier |
| 8712-CA-NS | Node services carrier, Profibus-DP LAN |
| 8711-CA-NS | Node services carrier, screw terminal LAN |
| 8750-CA-NS | Controller Carrier, simplex or redundant, power monitoring |
| 8709-CA-08 | I/O Carrier, 8 module with earth bar |
| 8455-SW-CF | MTL8000 Configurator Software (Software only) |
| 8117-DO-DC | 8-channel DO, 2-60Vdc isolated, unpowered |
| 8115-DO-DC | 8-channel DO, 2-60Vdc non-isolated, module powered |
| 8751-CA-NS | Controller Carrier with Earth Leak Detection |
| 8122-DI-DC | 16-channel DI, 24Vdc isolated, sinking |
| 8093-CC-550 | CARRIER EXT CBL 216in ** |
| 8121-DI-DC | 16-channel DI, 24Vdc non-isolated, module powered |
| 8125-DI-DC | 32-channel DI, non-isolated, module-powered |
| 8588-SW-FT | Fault Tolerant Ethernet Application for Redundant Host Computers |
| DNR480PS24-I | 24V, 20A POWER SUPPLY |
| 8140-DI-AC | 16CH DI 115VAC BLK ISO SINK |
| 8142-DO-DC | 16CH DO 12-42VDC MODULE PWRD |
| IC-8459-EB-NV | EBIM WORKBENCH -NOV |
| 8914-PS-AC | C1D2 10A 24VDC AC input P/S - Full temp range |
| 8913-PS-AC | C1D2 5A 12VDC & 5A 24VDC AC input P/S - Full temp range |
| 8106-TI-RT | 4-channel RTD input |
| 8105-TI-TC | 4-channel THC/mV input |
| 8215-DO-IS | 4-channel IS DO, solenoid driver IIC gas groups |
| 8459-RT-MT | Workbench Runtime Edition |
| 8459-UP-MT | Workbench Upgrade to Latest Version (works with any license type) |
| 8922-RB-IS | Railbus signal isolator (needed with all 2/1 systems) |
| 8220-DI-IS | 16-channel IS DI, switch/promixmity detector |
| 8459-EB-NV | EBIM WORKBENCH -NOV |
| NT8459-EB-NT | EBIM WORKBENCH -NOV |
| 8459-EB-MT | Ethernet BIM Workbench |
| 8811-IO-DC | 8-channel Safety DI/DO, 24VDC, module-powered |
| 8129-IO-DC | 8CH SUPERVISED DISCRETE I/O |
| 8139-SH-DC | 126CH ADDRESSABLE SMOKE AND HEAT |
| 8103-AI-TX | 8-channel AI, 4-20mA for 2-wire Tp |
| 8119-VI-05 | 8-channel Voltage Input, 1-5Vdc |
| 8104-AO-IP | 8-channel AO, 4-20mA |
| 8505-BI-MB | Modbus BIM |
| 8502-BI-DP | Profibus BIM |
| 8502-BI-DP-V1 | PROFIBUS DP BIM VERSION 1 |
| BQ2320-9R-EX | 24 TO 12VDC VOLTAGE CONVERTER - Mounting bracket BQ2320-ACC recommended. |
| 8101-HI-TX | 8-channel AI, 4-20mA with HART for 2-wire Tp |
| 8102-HO-IP | 8-channel AO, with HART for 4-20mA |
| 8459-SR-MT | SYSINT SW 12 MO LIC |
| 8123-PI-QU | 2-channel Pulse Quadrature Input |
| 8507-BI-DP | PROFIBUS DP MULTIBIM |
| 8920-PS-DC | IS module DC power supply (8 modules) |
| 8127-DI-SE | 32-channel SOE module |
| 8206-TI-IS | 8-channel IS RTD input |
| 8205-TI-IS | 8-channel IS THC/mV input |
| 8132-AI-UN | "8-channel Isolated Universal Analog Input 4-20mA, |
| 8223-PI-IS | 2-channel IS Pulse Counter, 1 ch Quadrature w/ DI/DO (MB only) |
| 8810-HI-TX | 8-channel Safety AI, 4-20mA with HART for 2-wire Tx |
| 8204-AO-IS | 8-channel IS AO, 4-20 mA |
| 8230-AI-IS | 8-channel IS AI, 0-10V, pot., 0-20mA/4-20mA, sinking |
| 8201-HI-IS | 8-channel IS AI, 4-20mA with Hart |
| 8202-HO-IS | 8-channel IS AO, 4-20 mA with Hart |
| 8515-BI-PN | PAC8000 PROFINET Scanner Module, Two 100Mbps copper interface. Requires Universal Node Services Carrier 8752-CA-NS. |
| 8516-BI-PN | PAC8000 PROFINET Scanner Module, Two 100Mbps Multi-Mode (MMF) ports. Requires Universal Node Services Carrier 8752-CA-NS |
| 8521-EB-NV | PAC8000 EBIM - NovaTech |
| 8521-EB-MT | PAC8000 Ethernet BIM |
| 8521-EB-DT | PAC8000 Ethernet BIM - Detronics |
| IC-8459-LC-NV | LOGIC WORKBENCH -NOV |
| 8521-CM-MT | CONTROL MASTER AXE |
| 8521-LC-MT | Logic Controller |
| 8521-LC-NV | LOGIC CONTROLLER - NOVATECH |
| 8521-LC-DT | PAC8000 Logic Controller - Detronics |
| IC-8459-LC-DT | WORKBENCH-LOGIC -DET |
| 8521-RI-NV | MOST EBIM -NOV WITH 1 TO 6 REDUNDANCY |
| IC-8841-LC-DT | SAFETY LOGIC WORKBENCH0 |
| IC-8841-LC-DR | SafetyNet Logic Workbench - Draeger |
| IC-8841-LC-NS | SafetyNet Logic Workbench - Plantsafe (Net Safety) |
| IC-8841-LC-PS | SafetyNet Logic Workbench - Plantsafe (Net Safety) |
| 8521-RT-DE | RTU Controller with DNP 3.0 over Ethernet |
| 8459-LC-MT | Logic Workbench |
| 8459-LC-NV | LOGIC WORKBENCH -NOV |
| 8459-LC-DT | WORKBENCH-LOGIC -DET |
| 8521-AX-MT | MTL OEM controller |
| 8521-PC-MT | Process Controller |
| 8521-PC-NV | PROCESS CONTROLLER - NOVATECH |
| 8841-LC-FB | SAFETY LOGIC WORKBENCH -FIREBUS |
| 8841-LC-DT | SAFETY LOGIC WORKBENCH0 |
| 8841-LC-MT | SafetyNet Logic Workbench |
| 8841-LC-DR | SafetyNet Logic Workbench - Draeger |
| 8841-LC-NS | SafetyNet Logic Workbench - Plantsafe (Net Safety) |
| 8521-HC-MT | Hybrid Controller |
| 8851-LC-MT | SafetyNet Controller |
| 8851-LC-DT | SafetyNet Controller - Detronics |
| 8851-LC-DR | SafetyNet Controller - Draeger |
| 8851-LC-NS | SafetyNet Controller - Net Safety |
| 8851-LC-FB | SNET CONTROLLER -FIREBUS |
| 8459-PC-30 | "Process Workbench, 3000 IO" |
| 8459-HC-30 | "Hybrid Workbench, 3000 IO" |
| ST-1124 | RSTi input module 4 points, Negative Logic, 5VDC |
| ST-1114 | RSTi input module 4 points, Positive Logic, 5VDC |
| ST-7408 | RSTi Potential Distribution module for Shield module, with module ID type with LED. Terminates up to 8 shields. |
| ST-7508 | RSTi Potential Distribution module module for 0VDC, with module ID type with LED |
| ST-7518 | RSTi Potential Distribution module module for 24VDC, 10 A, with module ID type with status LEDs |
| ST-7588 | RSTi Potential Distribution module module, 0VDC and 24VDC 4 points with module ID type with status LEDs |
| ST-1324 | RSTi input module 4 points, Negative Logic, 48VDC |
| ST-1314 | RSTi input module 4 points, Positive Logic, 48V DC |
| ST-2324 | RSTi output module 4 points, Positive Logic, 24VDC/ 0.5A |
| ST-2424 | RSTi output module 4 points, Positive Logic, Diagnostics, 24VDC/ 0.5A |
| ST-2742 | RSTi output module Isolated Relay Output 2 points, 230V AC/ 2A |
| ST-2314 | RSTi output module 4 points, Negative Logic, 24VDC/ 0.5A |
| ST-1804 | RSTi input module 4 points, 110V AC (AC 85V ~ 132V) |
| ST-1904 | RSTi input module 4 points, 220V AC (AC 170V ~ 264V) |
| ST-2114 | RSTi output module 4 points, TTL, 5VDC/20mA Inverting |
| ST-2124 | RSTi output module 4 points, TTL, 5VDC/20mA Non inverting |
| ST-7641 | RSTi Expansion Field Power Distribution module, 5, 24, 48, AC 10 Amp no LED status with module ID. |
| ST-1228 | RSTi input module 8 points, Negative Logic, 12V/ 24VDC |
| ST-1218 | RSTi input module 8 points, Positive Logic, 12V/ 24VDC |
| ST-2414 | RSTi output module 4 points, Negative Logic, Diagnostics, 24VDC/ 0.5A |
| STXRTB009 | RSTi spare removable terminal blocks. Quantity of 7. The terminal block is included on I/O and network interfaces. |
| ST-2328 | RSTi output module 8 points, Positive Logic, 24VDC/ 0.5A |
| STXACC002 | RSTi spare blank markers, quantity 100. |
| ST-2318 | RSTi output module 8 points, Negative Logic, 24VDC/ 0.5A |
| ST-7111 | RSTi Expansion Power Distribution module module, 24VDC, 1 A 5VDC booster |
| ST-2744 | RSTi output module Isolated Relay Output 4 Points, 230V AC/ 2A |
| ST-2524 | RSTi output module 4 points, Positive Logic, Diagnostics, 24VDC/ 2A |
| ST-7511 | RSTi 24VDC Expansion power module 5 VDC booster , 1 amp , with module ID type with LED |
| STXACC001 | RSTi spare numbered markers 0 to 9, quantity 100. Numbered markers are include in with I/O modules and network interfaces. |
| ST-2514 | RSTi output module 4 points, Negative Logic, Diagnostics, 24VDC/ 2A |
| ST-2852 | RSTi output module Triac Output 2 points, 12V ~ 125VAC/ 0.5A |
| ST-122F | RSTi input module 16 points, Negative Logic, 12V/ 24VDC (connector type) |
| ST-121F | RSTi input module 16 points, Positive Logic, 12V/ 24VDC (connector type) |
| ST-131F | RSTi input module 16 points, Positive Logic, 48VDC (connector type) |
| ST-221F | RSTi output module 16 points, Negative Logic, 24VDC/ 0.3A. Connector type, see notes. |
| ST-222F | RSTi output module 16 points, Positive Logic, 24VDC/ 0.3A. Connector type, see notes. |
| ST-2748 | RSTi output module Isolated Relay Output 8 Points, 230V AC/ 2A |
| ST-3524 | RSTi analog input module 4 Channels, -10~+10Vdc, 12-bit |
| ST-3424 | RSTi analog input module 4 Channels, 0~10Vdc, 12-bit |
| ST-3114 | RSTi analog input module 4 Channels, 0~20mA, 12-bit |
| ST-3624 | RSTi analog input module 4 Channels, 0~5Vdc, 12-bit |
| ST-3214 | RSTi analog input module 4 Channels, 4~20mA, 12-bit |
| ST-5442 | RSTi 2 Channels, PWM Out module, 0.5A/24V, Source, 2.5Khz |
| ST-4422 | RSTi analog output module 2 Channels, 0~10Vdc, 12-bit |
| ST-4112 | RSTi analog output module 2 Channels, 0~20mA, 12-bit |
| ST-4622 | RSTi analog output module 2 Channels, 0~5Vdc, 12-bit |
| ST-4522 | RSTi analog output module 2 Channels, -10~+10Vdc, 12-bit |
| ST-4212 | RSTi analog output module 2 Channels, 4~20mA, 12-bit |
| ST-5641 | RSTi 1 Channels, Pulse Out module, 0.5A/24V, Source, 20Khz |
| ST-5651 | RSTi 1 Channels, Pulse Out module, 0.5A/5V (RS422), 20Khz |
| ST-4424 | RSTi analog output module 4 Channels, 0~10Vdc, 12bit |
| ST-4114 | RSTi analog output module 4 Channels, 0~20mA 12bit |
| ST-4214 | RSTi analog output module 4 Channels, 4~20mA, 12bit |
| ST-5111 | RSTi High Speed Counter module, 1 Channel, 24VDC 1.5MHz |
| ST-5101 | RSTi High Speed Counter module, 1 Channel, 5VDC 1.5MHz |
| ST-5422 | RSTi PWM Out module, 2A/24V, Source, 2 Channels 2.5Khz |
| ST-3702 | RSTi analog input module 2 Channels, RTD |
| ST-3802 | RSTi analog input module 2 Channels, Thermocouple |
| ST-5351 | RSTi SSI Interface module 1 CH; 62.5K, 100K, 125K,250K,500K,1M,2Mbps |
| ST-3428 | RSTi analog input module 8 Channels, 0~10V, 12bit |
| STXCAN001 | RSTi CANOpen slave Network Adaper. 24VDC powered, expandable to 32 modules. |
| STXDNS001 | RSTi DeviceNet slave Network Adaper. 24VDC powered, expandable to 32 modules. |
| STXPNS001 | RSTi ProfiNet slave Network Adaper. 24VDC powered, expandable to 32 modules. |
| ST-5211 | RSTi Serial Interface module RS-232C, 1 Channel |
| ST-5221 | RSTi Serial Interface module RS-422, 1 Channel |
| ST-3704 | RSTi analog input module 4 Channels, RTD Connector Type |
| ST-5231 | RSTi Serial Interface module RS-485, 1 Channel |
| ST-3644 | RSTi analog input module 4 Channels, 0~5Vdc, 14-bit |
| ST-3544 | RSTi analog input module 4 Channels, -10~+10Vdc, 14-bit |
| ST-3444 | RSTi analog input module 4 Channels, 0~10Vdc, 14-bit |
| STXPBS001 | RSTi PROFIBUS DP/V1 slave Network Adaper. 24VDC powered, expandable to 32 modules. |
| ST-3118 | RSTi analog input module 8 Channels, 0~20mA, 12bit |
| ST-3218 | RSTi analog input module 8 Channels, 4~20mA, 12bit |
| ST-5444 | RSTi PWM Out module, 0.5A/24V, Source, 4 Channels, 2.5Khz |
| ST-5642 | RSTi 2 Channels, Pulse Out module, 0.5A/24V, Source, 20Khz |
| ST-3134 | RSTi analog input module 4 Channels, 0~20mA, 14-bit |
| ST-3234 | RSTi analog input module 4 Channels, 4~20mA, 14-bit |
| ST-5112 | RSTi High Speed Counter module, 2 Channels, 24VDC, 100Khz |
| STXMBE001 | RSTi Modbus TCP slave Network Adaper. 24VDC powered, expandable to 32 modules. |
| STXPBS032 | RSTi Profibus with 24VDC sink (Positive Logic) input, 32 points, expandable to 8 additional modules. |
| STXPBS132 | RSTi Profibus with 24VDC source (Negative Logic) input, 32 points, expandable to 8 additional modules. |
| STXDNS032 | RSTi DeviceNet with built-in 24VDC sink (Positive Logic) input, 32 points, expandable to 10 additional modules. |
| STXDNS132 | RSTi DeviceNet with built-in 24VDC source (Negative Logic) input, 32 points, expandable to 10 additional modules. |
| STXDNS432 | RSTi DeviceNet with 16 24VDC sink (Positive Logic) input and 16 24VDC source output built-in, expandable to 10 additional modules. |
| STXMBS001 | RSTi Modbus RS-232C slave Network Adaper. 24VDC powered, expandable to 32 modules. |
| STXMBS002 | RSTi Modbus RS-485 slave Network Adaper. 24VDC powered, expandable to 32 modules. |
| STXCCL001 | RSTi CC-link slave Network Adaper. 24VDC powered, expandable to 32 modules. |
| STXDNS332 | RSTi DeviceNet with built-in 24VDC source output, 32 points, expandable to 10 additional modules. |
| STXPBS825 | RSTi Profibus with 16 24VDC sink (Positive Logic) input and 16 isolated relay output, expandable to 8 additional modules. |
| STXPBS824 | RSTi Profibus with 16 24VDC sink (Positive Logic) input and 16 relay output, expandable to 8 additional modules. |
| STXPBS925 | RSTi Profibus with 16 24VDC source (Negative Logic) input and 16 isolated relay output, expandable to 8 additional modules. |
| STXPBS924 | RSTi Profibus with 16 24VDC source (Negative Logic) input and 16 relay output, expandable to 8 additional modules. |
| ST-3804 | RSTi analog input module 4 Channels, Thermocouple Connector Type |
| STXKITPNS001 | ProfiNET RSTi Starter Kit, limited to 1 per customer per customer site. Kit includes (1 each): ProfiNET Slave(STXPNS001),(8) 24VDC positive logic inputs module (ST-1218), (8) 24VDC source outputs module (ST- 2328), (4) 4-20ma current inputs module (S |
| STXDNS825 | RSTi DeviceNet with 16 24VDC sink (Positive Logic) input and 16 isolated relay output built-in, expandable to 10 additional modules. |
| STXDNS824 | RSTi DeviceNet with 16 24VDC sink (Positive Logic) input and 16 relay output built-in, expandable to 10 additional modules. |
| STXDNS532 | RSTi DeviceNet with 16 24VDC source (Negative Logic) input and 16 24VDC sink output built-in, expandable to 10 additional modules. |
| STXDNS925 | RSTi DeviceNet with 16 24VDC source (Negative Logic) input and 16 isolated relay output built-in, expandable to 10 additional modules. |
| STXDNS924 | RSTi DeviceNet with 16 24VDC source (Negative Logic) input and 16 relay output built-in, expandable to 10 additional modules. |
| STXKITCAN001 | CANopen RSTi Starter Kit, limited to 1 per customer per customer site. Kit(1 each): CANopen Slave(STXCAN001),(8) 24VDC pos. inputs (ST-1218), (8) 24VDC source outputs (ST- 2328), (4) 4-20ma current inputs(ST-3214), (4) 4-20ma current outputs (ST-4214 |
| STXKITCCL001 | CC-Link RSTi Starter Kit, limited to 1 per customer per customer site. Kit(1 each): CC-Link Slave(STXCCL001),(8) 24VDC pos. inputs (ST-1218), (8) 24VDC source outputs (ST- 2328), (4) 4-20ma current inputs(ST-3214), (4) 4-20ma current outputs (ST-4214 |
| STXPBS232 | RSTi Profibus with 24VDC sink output, 32 points, expandable to 8 additional modules. |
| STXPBS016 | RSTi Profibus with relay output, 16 points, expandable to 8 additional modules. |
| STXPBS116 | RSTi Profibus with relay output, 16 points, isolated, expandable to 8 additional modules. |
| STXPBS432 | RSTi Profibus with 16 24VDC sink (Positive Logic) input and 16 24VDC source output, expandable to 8 additional modules. |
| STXPBS532 | RSTi Profibus with 16 24VDC source (Negative Logic) input and 16 24VDC sink output, expandable to 8 additional modules. |
| STXDNS232 | RSTi DeviceNet with built-in 24VDC sink output, 32 points, expandable to 10 additional modules. |
| STXDNS116 | RSTi DeviceNet with built-in relay isolated outputs, 16 points, expandable to 10 additional modules. |
| STXDNS016 | RSTi DeviceNet with built-in relay output, 16 points, expandable to 10 additional modules. |
| STXKITDNS001 | DeviceNet RSTi Starter Kit, limited to 1 per customer per customer site. Kit includes (1 each): Profibus Slave(STXDNS001),(8) 24VDC positive logic inputs module (ST-1218), (8) 24VDC source outputs module (ST- 2328), (4) 4-20ma current inputs module ( |
| STXKITPBS001 | Profibus RSTi Starter Kit, limited to 1 per customer per customer site. Kit includes (1 each): Profibus Slave(STXPBS001),(8) 24VDC positive logic inputs module (ST-1218), (8) 24VDC source outputs module (ST- 2328), (4) 4-20ma current inputs module (S |
| STXKITMBE001 | RSTi Modbus TCP Starter Kit consist of a Modbus TCP Slave network interface, (8) 24VDC inputs, (8) 24VDC outputs, (4) current analog inputs and (2) analog outputs(Limited to one per customer per customer site). The Modbus TCP Starter Kit includes qu |
| STXPBS332 | RSTi Profibus with 24VDC source output, 32 points, expandable to 8 additional modules. |
| ST-5212 | RSTi Serial Interface module RS-232C, 2 Channels |
| ST-3708 | RSTi analog input module 8 Channels, RTD Connector Type |
| ST-5232 | RSTi Serial Interface module RS-485, 2 Channels |
| ST-5114 | RSTi High Speed Counter module, 4 Channel, 24VDC, 50Khz |
| ST-3808 | RSTi analog input module 8 Channels, Thermocouple Connector Type |
| IC752VDS048 | IHM - GE-TotalControl |
| IC754ACC0512MEM | Compact Flash for QP-View & Ctrl - 512MB |
| IC755ACC07MNT | Quick Panel+ 7" Accessory Kit - Replacment Mounting clips, Power and Serial Port Connectors |
| IC754ACC32MEM | Expandable User Memory, 32MB for QuickPanel View & Control |
| IC755ACC07PRO | QuickPanel+ 7" Replacement Screen Protectors, Pkg of 3 |
| IC754ACC64MEM | Expandable User Memory, 64MB for QuickPanel View & Control |
| IC754PCMCIA001 | PCMCIA Interface Adaptor |
| IC754PIF001 | 90-30 I/O INTERFACE FOR QP CONTROL |
| IC754TAN001 | VersaMax I/O Interface for QP Control |
| IC754UEX001 | VersaMax Micro Expansion I/O Interface for QP Control |
| IC754GEN001 | GE Fanuc Genius Comm for QP View & Ctrl |
| HMI-BEZ-204 | Stainless Steel Bezel: 6 inch Color & Mono (QPK2xxxx-L2P/ -S2P)/ NEMA 4X |
| HMI-BEZ-406 | Stainless Steel Bezel: 7.4 inch (QPGCXXX0000)/ NEMA 4X |
| HMI-BEZ-201 | Stainless Steel Bezel: 5 inch Color & Mono (QPJ2xxxx-L2P/ -S2P)/ NEMA 4X |
| IC755ACC07ADP | Quick Panel+ Panel Adapter Kit - 8"QP to 7"QP+ |
| IC754DVNS01 | DeviceNet Slave for QP View |
| HMI-BEZ-203 | Stainless Steel Bezel: 10.5 inch (QPI2xxxx-C2P/ -L2P/ -S2P)/ NEMA 4X |
| HMI-BEZ-403 | Stainless Steel Bezel: 10.5 inch (QPICxxx0000)/ NEMA 4X |
| HMI-BEZ-202 | Stainless Steel Bezel: 9 inch Mono (QPI2xxxxE2P)/ NEMA 4X |
| HMI-BEZ-205 | Stainless Steel Bezel: 12.1 inch (QPL2xxxx-C2P)/ NEMA 4X |
| IC754DVNM01 | DeviceNet Master for QP Control |
| IC754VSB06MTD | View Basic 6 inch Mono Touch DC |
| IC754VBB06MTD | View Basic 6 inch Mono Touch DC Blank |
| IC754VKB06MTD | Starter Kit/ 6 inch View Mono Basic/ 24VDC |
| IC754PBSS01 | PROFIBUS Slave for QP View |
| IC754VSB06CTD | VIEW BASIC 6IN TFT TOUCH DC |
| IC754VGB06CTD | VIEW BASIC 6IN TFTTOUCH DC FLAT GEF |
| IC754VBB06CTD | 6 INCH BASCI TFT WITH BLANK |
| IC754VSI06MTD | View Intermediate 6 inch Mono Touch DC |
| IC754VBI06MTD | View Intermediate 6 inch Mono Touch DC Blank |
| IC754VKI06MTD | Starter Kit/ 6 inch View Mono Interm/ 24VDC |
| IC754PBSM01 | PROFIBUS Master for QP Control |
| IC754VGI06STD | VIEW INTERM 6IN STN TOUCH DC FLAT GEF |
| IC754VSI06STD | View Intermediate 6 inch STN Touch DC |
| IC754VBI06STD | View Intermediate 6 inch STN Touch DC Blank |
| IC754VKI06STD | Starter Kit/ 6 inch View STN Interm/ 24VDC |
| GQPM3D200B2P | 6 inch Blue Monochrome Mini/ GE Fanuc Label/ 24VDC |
| IC754VBL06MTD | View Loaded 6 In Mono Touch DC Blank |
| IC754VSL06MTD | View Loaded 6 In Mono Touch DC |
| IC754VKL06MTD | Starter Kit 6 In Mono View Loaded 24 VDC |
| IC754VSI06MTD/ABD | View Intermediate 6in Mono with DH+ |
| IC754VSI06STD/ABD | View Intermediate 6in STN with DH+ |
| IC754VBI08CTD | VIEW INTERM 8IN COLOR TFT TOUCH DC BLANK |
| IC754VGI08CTD | VIEW INTERM 8IN COLOR TFT TOUCH DC GEF |
| IC754VBI12MTD | View Intermediate 12 Inch Mono Touch DC Blank |
| IC754VKI08CTD | Starter Kit 8in TFT View Interm 24VDC |
| IC754CBL06MTD | Ctrl Loaded 6 In Mono Touch DC Blank |
| IC754VKI12MTD | Starter Kit/ 12 Inch View Mono Interm/ 24VDC |
| IC754CSL06MTD | Ctrl Loaded 6 In Mono Touch DC |
| IC754VSI12MTD | View Intermediate 12 Inch Mono Touch DC |
| IC754VSL06MTD/ABD | View Loaded 6 In Mono with DH+ |
| IC755CSW07CDA | QuickPanel+ View & Control, 7" Color TFT Widescreen with Multi-touch Projected Capacitive Screen, GE Monogram Bezel, 24 VDC Powered |
| CQPKSTDN0000 | 6 inch Color STN/ TCP Label/ No Ethernet/ CF/ 24VDC/ UL/ cUL/ CE/ UL1604 |
| IC754VGL06CTD | 6" TFT QuickPanel View, Loaded, 24VDC, Flat Bezel, GE Fanuc Overlay |
| IC754VKL06CTD | Starter Kit/ 6 inch TFT View Loaded/ 24VDC |
| IC754VSL06CTD | 6 inch TFT QuickPanel View/ Loaded/ 24VDC |
| IC754VBL06CTD | 6 inch TFT QuickPanel View/ Loaded/ 24VDC/ Blank Label |
| IC754VSI06SKD | VIEW INTERM 6IN STN KEYPAD DC QP OVRLAY |
| IC754VBL06CTDCA | View 6in TFT Touch Blank Conformal Coat |
| IC754VSL06CTD/ABD | View Loaded 6in Color TFT with DH+ |
| IC754VKI12CTD | Starter Kit/ 12 inch View TFT Interm/ 24VDC |
| IC754VGI08CTD/ABD | View Intermediate 8 Inch Color with DH+ |
| IC754VSI12MTD/ABD | View Intermediate 12In Mono with DH+ |
| IC754VBI12CTD | View Interm 12 inch Color TFT Touch DC Blank |
| IC754VSI12CTD | View Intermediate 12 inch Color TFT Touch DC |
| IC754VSI12CTDCA | VIEW 12IN INT COLOR TFT CONCOAT |
| IC754VBF08CTD | View Loaded 8In Color TFT Touch DC Blank |
| IC754VGF08CTD | VIEW LOADED 8IN COLOR TFT TOUCH DC GEF |
| IC754CSL06CTD | 6 inch TFT QuickPanel Control/ Loaded/ 24VDC |
| IC754CBL06CTD | 6 inch TFT QuickPanel Control/ Loaded/ Blank Label/ 24VDC |
| IC754VKF08CTD | Starter Kit 8in TFT View Fully Loaded |
| QPGCGDE0000 | 7.4 inch Color TFT/ GE Fanuc/ Ethernet/ CF Card/ 24VDC/ UL/ cUL/ CE/ UL160 4 |
| IC754VSI12CTD/ABD | View Intermediate 12in Color with DH+ |
| IC754CSF06CTD | CONTROL 64MB/64MB 6IN COLOR TFT TOUCH DC |
| QPGCTDE0000 | 7.4 inch Color TFT/ TCP/ Ethernet/ CF Card/ 24VDC/ UL/ cUL/ CE/ UL1604 |
| CQPGCTDE0000 | QUICKPANEL 7.4 inch TFT/Ethernet/CF/24V |
| IC755CSS12CDA | QuickPanel+ View & Control, 12" Color TFT Widescreen with Multi-touch Projected Capacitive Screen, GE Monogram Bezel, 24 VDC Powered |
| IC754CSX06CTD | Control 64MB/96MB 6in Color TFT Touch DC |
| IC754CBF08CTD | CONTROL FULLY LOADED 8 INCH TFT BLANK |
| IC754CGF08CTD | CONTROL FULLY LOADED 8 INCH TFT GEF |
| IC754VKF12CTD | STARTER KIT 12IN TFT VIEW FULLY LOADED |
| IC754VBF12CTD | View 64/64MB 12in Color TFT Touch Blank |
| IC754VSF12CTD | VIEW 64/64MB 12IN COLOR TFT TOUCH DC |
| IC754VGF08CTD/ABD | View Fully Loaded 8 Inch Color with DH+ |
| IC754VBF12CTDCA-EC | VIEW 12IN COLOR TFT BLANK- CONFMAL COAT |
| IC754VBF12CTDCA | VIEW 64/64MB 12IN COLOR TFT Confomal |
| GQPI3D200E2P | 9 inch Monochrome EL/ GE Fanuc Label/ 24VDC/ UL/ cUL/ CE/ UL1604 |
| IC754CBF12CTD | CONTROL 64MB/64MB 12IN COLOR TFT BLANK |
| IC754CSF12CTD | Control 64MB/64MB 12in Color TFT Touch D |
| GQPI31200E2P | 9 inch Monochrome EL/ GE Fanuc Label/ 110VAC/ No Agency Approvals |
| IC754VSF12CTD/ABD | View Fully Loaded 12in Color with DH+ |
| IC754VKF15CTD | Starter Kit/ 15 inch TFT View Fully Loaded/ 24VDC |
| QPICTDE0000 | 10.4 inch Color TFT/ TCP/ Ethernet/ CF Card/ 24VDC/ UL/ cUL/ CE/ UL1604 |
| CQPICTDE0000 | 10.5 inch Color TFT/ TCP Label/ 24VDC/ UL/ cUL/ CE/ UL1604 |
| CQPICTAE0000 | QP 10.5 In TFT, Ethernet, CF, 110 VAC |
| IC754VSF15CTD | 15 inch TFT QuickPanel View/ Fully Loaded/ 24VDC |
| IC754VBF15CTD | 15 inch TFT QuickPanel View/ Fully Loaded/ 24VDC / Blank Label |
| IC754VBF15CTDCA | 15 INCH TFT QUICKPANEL VIEW/ Conformal |
| IC754CBF15CTD | 15 inch TFT QuickPanel Ctrl/ Fully Loaded/ 24VDC / Blank Label |
| IC754CSF15CTD | 15 inch TFT QuickPanel Control/ Fully Loaded/ 24VDC |
| IC754VSF15CTD/ABD | View Fully Loaded 15 Inch TFT with DH+ |
| IC694TBB132 | Box Style High Density Terminal Block with extended depth for large wires - 36 Connections |
| IC694TBS132 | Spring clamp style High Density Terminal Block with extended depth for l arge wires - 36 Connections |
| IC695ACC003 | Door labels for RX3i IC695xxx I/O modules. Kit includes 2 each of IC695ALG600, IC695ALG608, IC695ALG616, IC695ALG626, IC695ALG628, IC695ALG704, IC695ALG708, IC695ALG728, IC695HSC304, IC695HSC308 |
| IC695SPF550 | 100Base-SX, Connector LC-Duplex, wavelenght 850nm, media type MMF, distance 500 meters |
| IC695SPF002 | 100Base-FX, Connector LC-Duplex, wavelenght 1300nm, media type MMF, distance 2.200 meters |
| IC695LRE001 | RX3i Local Expansion Module Occupies no system slots on base |
| IC695SPC100A | RX3I 10/100/1000BASE-T (CAT5 100M) SFP |
| IC695SPC100 | RX3i 10/100/1000base-TX (CAT5 100m) Small Form Pluggable Transceiver |
| IC695ACC651 | SERIES 90-70 TO RX3I I/O ADAPTER CARD |
| IC695ACC400 | RX3i CPU Energy Pack. Compatible with IC695CPE305 and IC695CPE310 only. Energy Pack ships with CPE305 and CPE310. |
| IC695CRH024 | 9070 ALG230 TO RX3I ALG220 HARNESS ASM |
| IC695CRH025 | 9070 ALG230 TO RX3I ALG221 HARNESS ASM |
| IC695CRH026 | 9070 ALG230 TO RX3I ALG222 HARNESS ASM |
| IC695CRH027 | 9070 ALG230 TO RX3I ALG232 HARNESS ASM |
| IC695CRH023 | 9070 ALG230 TO RX3I ALG616 HARNESS ASM |
| IC695CRH036 | 9070 ALG320 TO RX3I ALG390 HARNESS ASM |
| IC695CRH037 | 9070 ALG320 TO RX3I ALG391 HARNESS ASM |
| IC695CRH035 | 9070 ALG320 TO RX3I ALG708 HARNESS ASM |
| IC695CRH029 | 9070 ALG440 TO RX3I ALG220 HARNESS ASM |
| IC695CRH030 | 9070 ALG440 TO RX3I ALG221 HARNESS ASM |
| IC695CRH028 | 9070 ALG440 TO RX3I ALG616 HARNESS ASM |
| IC695CRH032 | 9070 ALG441 TO RX3I ALG220 HARNESS ASM |
| IC695CRH033 | 9070 ALG441 TO RX3I ALG222 HARNESS ASM |
| IC695CRH034 | 9070 ALG441 TO RX3I ALG232 HARNESS ASM |
| IC695CRH031 | 9070 ALG441 TO RX3I ALG616 HARNESS ASM |
| IC695CRH004 | 9070 MDL240 TO RX3I MDL250 HARNESS ASM |
| IC695CRH007 | 9070 MDL241 TO RX3I MDL231 HARNESS ASM |
| IC695CRH003 | 9070 MDL250 TO RX3I MDL260 HARNESS ASM |
| IC695CRH005 | 9070 MDL251 TO RX3I MDL240 HARNESS ASM |
| IC695CRH006 | 9070 MDL251TO RX3i MDL250 Harness Asm |
| IC695CRH001 | 9070 MDL252 TO RX3I MDL241 HARNESS ASM |
| IC695CRH002 | 9070 MDL253 TO RX3I MDL241 HARNESS ASM |
| IC695CRH015 | 9070 MDL340 TO RX3I MDL330 HARNESS ASM |
| IC695CRH016 | 9070 MDL340 TO RX3I MDL350 HARNESS ASM |
| IC695CRH017 | 9070 MDL341 TO RX3I MDL350 HARNESS ASM |
| IC695CRH018 | 9070 MDL341 TO RX3I MDL390 HARNESS ASM |
| IC695CRH014 | 9070 MDL350 TO RX3I MDL340 HARNESS ASM |
| IC695CRH011 | 9070 MDL640 TO RX3I MDL632 HARNESS ASM |
| IC695CRH012 | 9070 MDL651 TO RX3I MDL654 HARNESS ASM |
| IC695CRH009 | 9070 MDL652 TO RX3I MDL654 HARNESS ASM |
| IC695CRH008 | 9070 MDL653 TO RX3I MDL660 HARNESS ASM |
| IC695CRH010 | 9070 MDL654 TO RX3I MDL658 HARNESS ASM |
| IC695CRH013 | 9070 MDL671 TO RX3I MDL645 HARNESS ASM |
| IC695CRH038 | 9070 MDL740 to RX3i MDL765 Harness ASM |
| IC695CRH020 | 9070 MDL750 TO RX3I MDL753 HARNESS ASM |
| IC695CRH019 | 9070 MDL752 TO RX3I MDL753 HARNESS ASM |
| IC695CRH039 | 9070 MDL753 to RX3i MDL765 Harness ASM |
| IC695CRH022 | 9070 MDL940 TO RX3I MDL916 HARNESS ASM |
| IC695CRH021 | 9070 MDL940 TO RX3I MDL931 OR 940 HRNASM |
| IC694MDL634 | Input module 24 VDC 8 point POS/NEG logic. |
| IC694CHS398 | Base Expansion 5 Slots |
| IC695SPF010 | RX3i Single 1000base-LX (fiber 10 km) Small Form Pluggable Transceiver Module |
| IC694CEE001 | RX3i CEP EXPANSION CARRIER. MUST BE USED WITH RX3I CEP CARRIER IC695CEP001. MAX 1 RX3I CEP EXPANSION CARRIER IC694CEE001 PER RX3I CEP CARRIER. |
| IC694MDL732 | Output module 12/24 VDC 0.5 amps 8 points, positive logic. |
| IC694ACC003 | Door labels for the IC694MDLxxx I/O modules. The kit includes two each of the following modules. IC694ACC300, IC694ACC310, IC694ALG220, IC694ALG221, IC694ALG222, IC694ALG223, IC694ALG390, IC694ALG391, IC694ALG392, IC694ALG442,IC694APU300, IC694APU3 |
| IC694MDL930 | Output module, relay 4 amp, 8 point isolated per point. |
| IC694MDL230 | Input module, 120 VAC 8 point, isolated per point. |
| IC694MDL730 | OUTPUT MODULE 12/24 VDC 2AMPS 8 POINTS POSIVIVE LOGIC |
| IC694MDL231 | Input module, 240 VAC 8 point, isolated per point. |
| IC694MDL241 | Input module 24 VAC, 16 points. |
| IC694MDL645 | Input module 24 VDC 16 point POS/NEG logic. |
| IC695LRE001CA | RX3i Local Serial Expansion Conformal Coated. |
| IC694PWR321 | Power Supply 120/240 VAC 125 VDC Standard |
| IC694PWR331 | Power Supply 24 Vdc High Capacity. |
| IC694MDL646 | INPUT MODULE 24 VDC 16 POINT POS/NEG LOGIC 1 MSEC FILTER |
| IC694MDL741 | Output module 12/24 VDC 0.5 amps 16 points, negative logic. |
| IC694MDL632 | Input module 125 VDC 8 point POS/NEG logic. |
| IC694MDL740 | Output module 12/24 VDC 0.5 amps 16 points, positive logic. |
| IC694MDL940 | Output module, relay 2 amp 16 point, non isolated. |
| IC694MDL390 | Output module 120/240VAC 2 amps 5 point isolated. |
| IC695ACC400CA | Conformal Coated. RX3i CPU Energy Pack. Compatible with IC695CPE305 and IC695CPE310 only. Energy Pack ships with CPE305 and CPE310. |
| IC694MDL230CA | Conformal Coated Input module, 120VAC 8 point isolated. |
| IC694ACC300 | Input simulator module, 16 points. |
| IC694MDL330 | Output module 120/240 VAC 2amps 8 Points. |
| IC694MDL930CA | Conformal Coated Relay Output module, 4 amp 8 point isolated |
| IC694MDL240 | Input module 120 VAC, 16 points. |
| IC694CHS392 | Base Expansion 10 Slots |
| IC694PWR331CA | Conformal Coated Power Supply 24VDC, added capacity |
| IC694MDL645CA | Conformal Coated Input module 24VDC 16 point POS/NEG logic |
| IC694MDL635 | Input module 125 VDC 16 point POS/NEG logic. Module does not have UL certification on revision A. |
| IC694CHS398CA | Conformal Coated 5 slot expansion base. |
| IC694MDL241CA | Conformal Coated Input 24 VAC 16 points. |
| IC694MDL753 | Output module, 12/24VDC POS logic, 32 points. Interface uses Fujitsu connector. |
| IC694MDL752 | Output module 5/24VDC (TTL) 0.5 amp 32 point negative logic. |
| IC694MDL654 | Input module 5/12 VDC (TTL) 32 point POS/NEG logic. |
| IC694MDL758 | Output module, 12/24VDC POS logic, 32 points, 0.5amp per point. Module requires terminal block IC694TBx032. Terminal block doesn't ship with module. |
| IC694MDL734 | Output module 125VDC 1 amp 6 points isolated POS/NEG logic. |
| IC694PWR321CA | Conformal Coated Power Supply 120/240VAC, standard. |
| IC694MDL655 | Input module 24 VDC 32 point POS/NEG logic. |
| IC694MDL660 | RX3i 24VDC Input Module 32 point. Module is supported by serial bus andis not limited to the universal base or expansion base. The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block). Terminal |
| IC694MDL390CA | Conformal Coated OUTPUT module 120/240 VAC 2A 5 point, isolated per point |
| IC694PWR330 | Power Supply 120/240 Vac 125 Vdc High Capacity |
| IC694MDL741CA | Conformal Coated Output module 12/24 VDC 0.5 amp 16 points NEG logic. |
| IC694MDL632CA | Conformal Coated Input module 125 VDC 8 point NEG/POS logic. |
| IC694MDL742 | Output module 12/24VDC, 1 amp 16 point positive logic ESCP protection. |
| IC694MDL916 | Output module, Isolated Relay, Normally Open, 4 Amp, 16 point. Requires High Density Terminal Block (IC694TBBx32 or IC694TBSx32). Only compatible with RX3i.Compatible high speed serial bus on both Universal Base and Standard expansion base. |
| IC695PSD040 | RX3i 24VDC power supply, 40 watts. |
| IC694MDL940CA | Conformal Coated Relay Output module 2 amp, non isolated 16 points. |
| IC693MDL635 | Input module 125 VDC 16 point POS/NEG logic. Module does not have UL certification. |
| IC694MDL931 | Output module, relay 3 amp form B and C; 8 point isolated |
| IC694MDL658 | INPUT 48 VDC POS/NEG 32PT FAST. Wiring termination is two Fujitsu connectors. |
| IC694MDL250 | 120 Vac Isolated Input (16 points). Module requires a terminal block IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard expansion base. Requires firmware 3.5 and |
| IC694MDL740CA | Conformal Coated Output module 12/24 VDC 0.5 amps 16 points, positive logic. |
| IC694MDL240CA | Conformal Coated Input module 120 VAC 16 point |
| IC694MDL646CA | Conformal Coated Input module 24 VDC 16 point POS/NEG logic. 1msecond filtering. |
| IC694MDL340 | Output module 120 VAC 0.5 amps 16 Points. |
| IC694MDL310 | Output module, 120 VAC 0.5 amps 12 points. |
| IC695CEP001 | RX3i CEP CARRIER W/ RJ45 COPPER ETHERNET |
| IC694ALG220 | Input module, analog 4 point voltage. |
| IC694CHS392CA | Conformal Coated 10 slot I/O expansion base. |
| IC694ALG221 | Input module, analog 4 point current. |
| IC694MDL752CA | Conformal Coated Output module, 5/12-24VDC, 32 point NEG logic. |
| IC694MDL753CA | Output module, 12/24VDC POS logic, 32 points. Interface uses Fujitsu connector. |
| IC695CHS007 | 7 Slot Universal Base. Slot 0 limited to power supply (IC695PSxxx) only and slot 6 is a PCI slot only (IC695xxx). Slots 1 through 5 support both PCI and high speed serial connection (IC695xxx and IC694xxx) |
| IC694MDL655CA | Conformal Coated Input module 24 VDC POS/NEG logic 32 points. 1msec filter. Interface is a Fujitsu connector. |
| IC694MDL654CA | Conformal Coated Input module 32 points 5/12VDC TTL POS/NEG logic. Termi nation is a Fujitsu connector. |
| IC694MDL734CA | Conformal Coated Output module 125VDC, 1amp, 6 point, isolated per point. |
| IC695PSD140 | Multipurpose Power Supply is suitable for use in load-sharing and redund ancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. |
| IC694PWR330CA | Conformal Coated Power Supply 120/240VAC 125VDC, added capacity. |
| IC694MDL758CA | Conformal Coated version output module, 12/24VDC POS logic, 32 points, 0.5amp per point. Module requires terminal block IC694TBx032. Terminal block doesn't ship with module. |
| IC694ALG390 | OUTPUT MODULE ANALOG 2 POINT VOLTAGE |
| IC694ALG391 | Output module analog 2 points, current. |
| IC694MDL754 | 12/24VDC Output (0.75 amps/point)Module 32 point. Requires terminal block IC694TBBx32 box style or IC694TBSx32 spring clamp. Terminal block is sold seperately. Output response Time is 0.5ms. |
| IC694MDL660CA | RX3i 24VDC Input Module 32 point. Module is supported by serial bus andis not limited to the universal base or expansion base. The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block). Terminal |
| IC694MDL742CA | Conformal coated output module 12/24 VDC 1amp 16 point positive logic ESCP protection |
| IC694MDL916CA | Conformal coated Relay Output module, normally closed and Form C, 4 amp isolated, 16 points. Requires terminal block IC694TBxx32. Compatible with RX3i onlyand requires firmware 3.5 and ME 5.5 or above. |
| IC695PSD040CA | RX3i 24VDC power supply, 40 Watt Conformal Coated. |
| IC694MDL340CA | Conformal Coated 120/240 Output module, 0.5A,16 points |
| IC694MDL250CA | Conformal Coated. 120 Vac Isolated Input (16 points). Module requires a terminal block IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard expansion base. Requir |
| IC694ALG221CA | Conformal Coated Input module, analog 4 point current. |
| IC695PSA040 | RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two slots on s ystem base. |
| IC694MDL350 | 120/240 Vac Isolated Output, 2 Amp (16 Points). Module requires a terminal block (IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard. Requires firmware 3.5 and ME |
| IC695CHS007CA | 7 Slot Universal Base Conf Coa. Slot 0 limited to power supply (IC695PSxxx) only and slot 6 is a PCI slot only (IC695xxx). Slots 1 through 5 support both PCI and high speed serial connection (IC695xxx and IC694xxx) |
| IC695CHS012 | RX3i 12 slot universal base |
| IC694MDL260 | Input module 120 VAC, 32 points. Module requires a terminal block IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard expansion base. Requires firmware 3.5 and abo |
| IC694ALG220CA | Conformal Coated Analog Input Voltage module, 4 channels. |
| IC695PSD140CA | 24VDC Multipurpose Power Supply CONFORMAL COATED is suitable for use in load-sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. It can be used as the only power supply in the back |
| IC695PSA140 | 120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load -sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. It can be used as the only power supply in the backplan |
| IC694ALG391CA | Conformal Coated Analog Current Output module, 2 channels. |
| IC694MDL754CA | Conformal Coated. 12/24VDC Output (0.75 amps/point)Module 32 point. Requires terminal block IC694TBBx32 box style or IC694TBSx32 spring clamp. Terminal block is sold seperately. Output response Time is 0.5ms. |
| IC695CHS016 | RX3i 16 universal modules slots base |
| IC694APU300 | High speed counter module 200KHZ A B and C type. |
| IC695PSA040CA | RX3i AC Power Supply, 40 Watt Conformal Coated |
| IC694MDL350CA | Conformal Coated 120/240 Vac Isolated Output, 2 Amp (16 Points). Module requires a terminal block (IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard. Requires fi |
| IC695CHS012CA | RX3i 12 slot universal backplane. Conformal Coated. |
| IC694MDL260CA | Conformal coated. Input module 120 VAC, 32 points. Module requires a terminal block IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard expansion base. Requires f |
| IC695PSA140CA | RX3i Conformal Coated 120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load-sharing and redundancy application. |
| IC695CMM002 | RX3i serial communications module. Two isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane. |
| IC695ALG608 | Analog Input module, 8 channels single ended, 4 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The anal |
| IC695ALG704 | Analog Output Module, 4 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires high capacity terminal block IC |
| IC694ALG442 | Analog combination module current/voltage 4 inputs 2 outputs. |
| IC695HSC304 | RX3i High Speed Counter, 4 channels. 8 configurable inputs and 7 configurable ESCP outputs. Module supports high speed counting, input interrupts and programmable limit switch. |
| IC695ACC650 | Series 90-70 to RX3i Mechanical Frame |
| IC694BEM320 | RX3i Communication Module, I/O Link Interface Module (Slave). Module uses RX3i high speed serial bus. |
| IC695CHS016CA | RX3i 16 universal slots backplane with conformal coating. |
| IC694ALG442CA | Conformal Coated Analog Input module, 4 in and 2 out. Voltage and current supported. |
| IC694ALG542 | RX3i Efficiency combination analog module, 4 in voltage/current and 2 out voltage/current with 16 bit resolution and advanced diagnostics. Requires Proficy® Machine Edition Logic Developer 6.5 SIM 5 and above CPU firmware 6.5 and above. |
| IC694ALG222 | Input module, analog 16 point single ended/8 channel differential, voltage. |
| IC695CMM002CA | RX3i serial communications module. Two isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane. Conformal Coated |
| IC695ALG608CA | Conformal Coated Analog Input Module, 8 Channel voltage/current. Module does not include terminal block. |
| IC694ALG223 | Input module, analog 16 point single ended, current. |
| IC695ALG704CA | Conformal Coated Analog Output Module,4 channel voltage/current. Module does not include terminal block. |
| IC695MDL664 | Smart Digital 24VDC Input module, 16 input channels in two groups of eight. Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required. |
| IC694ALG542CA | Conformal Coated RX3i Efficiency combination analog module, 4 in voltage/current and 2 out voltage/current with 16 bit resolution and advanced diagnostics. Requires Proficy® Machine Edition Logic Developer 6.5 SIM 5 and above CPU firmware 6.5 and abo |
| IC694ALG233 | RX3i Efficiency 16-Channel Advanced Analog Current Input module provides 16 single-ended or 8 differential input channels. 0 - 20mA and 4 - 20mA with 16 bit resolution. Advanced diagnostics. Requires Proficy® Machine Edition Logic Developer 6.5 SIM |
| IC694ALG232 | RX3i Efficiency 16-Channel Advanced Analog Voltage Input module provides 16 single-ended or 8 differential input channels. 0 to 10 V (unipolar), -10 to +10V (bipolar) with 16 bit resolution. Advanced diagnostics. Requires Proficy® Machine Edition Log |
| IC694BEM321 | RX3I Communication Module, I/O Link Interface Module (Master). Module is on the high speed serial bus. |
| IC695MDL664CA | Conformal Coated. Smart Digital 24VDC Input module, 16 input channels in two groups of eight. Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required. |
| IC695ALG600 | UNIVERSAL ANALOG MODULE. 8 CHANNELS OF ANALOG CONFIGURABLE FOR THERMOCOUPLE,RTD, RESISTIVE, CURRENT, OR VOLTAGE. 2 ISOLATED GROUPS, 4 CHANNELS PER GROUP. Terminal block ordered separately. |
| IC694ALG392 | Output module analog 8 points, voltage/current. |
| IC694ALG233CA | Conformal Coated RX3i Efficiency 16-Channel Advanced Analog Current Input module provides 16 single-ended or 8 differential input channels. 0 - 20mA and 4 - 20mA with 16 bit resolution. Advanced diagnostics. Requires Proficy® Machine Edition Logic De |
| IC694ALG232CA | Conformal Coated RX3i Efficiency 16-Channel Advanced Analog Voltage Input module provides 16 single-ended or 8 differential input channels. 0 to 10 V (unipolar), -10 to +10V (bipolar) with 16 bit resolution. Advanced diagnostics. Requires Proficy® Ma |
| IC695ALG616 | Analog Input module, 16 channels single ended, 8 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The ana |
| IC695ALG628 | Analog Input HART module, 8 channels single ended, 4 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The |
| IC694ALG392CA | Conformal Coated Output module analog 8 points, voltage/current. |
| IC694ALG223CA | Input module, analog 16 point single ended, current. |
| IC695CMM004 | RX3i serial communications module. Four isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane. |
| IC694APU305 | I/O Processor high speed counter for Gray Code Encoder or A QUAD B Encoder. 30 kHz Abolute Encoder or 200 kHz A QUAD B Encoder. |
| IC695CNM001 | RX3I CANOPEN MASTER |
| IC695HSC308 | RX3i High Speed Counter, 8 channels. 16 configurable inputs and 14 configurable ESCP outputs. Module supports high speed counting, input interrupts and programmable limit switch. Module requires PCI bus. Requires terminal block IC694TBxx32. |
| IC695ALG600CA | Conformal Coated Universal Analog Input module. Terminal block not included. |
| IC695MDL765 | Smart Digital Output Module 24/125 volt DC, ESCP 1A Positive Logic 16 Points. Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required. |
| IC695ALG616CA | Conformal Coated Analog Input Module,16 channel voltage/current. |
| IC695PRS015 | Pressure Transducer module. The serial port communicates with up to 15 Honeywell LG1237 Smart Pressure Transducer sensors. Requires firmware/software 6.5 or higher. |
| IC695ALG708 | Analog Output Module, 8 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires high capacity terminal block IC |
| IC695PNC001 | Profinet Controller. The PNC module provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 device, running at both 100Mbps and 1Gbps. Compatible with IC695CPU315, CPU320, CPE310 and CPE305 only a |
| IC695PNS001 | RX3i Profinet Scanner Module |
| IC695GCG001 | RX3i GENIUS Communications Gateway |
| IC695MDL765CA | Conformal Coated. Smart Digital Output Module 24/125 volt DC, ESCP 1A Positive Logic 16 Points. Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required. |
| IC695ETM001 | Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base |
| IC695PNC001CA | Conformal Coated. Profinet Controller. The PNC module provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 device, running at both 100Mbps and 1Gbps. Compatible with IC695CPU315, CPU320, CPE310 |
| IC695CMM004CA | Conformal Coated. RX3i serial communications module. Four isolated RS- 232/485 port.Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane. |
| IC695CMX128 | Control Memory Xchange Module 128Megbytes of user shared memory. |
| IC695ALG708CA | Conformal Coated Analog Output Module,8 channel voltage/current. Moduledoes not include terminal block. |
| IC695NIU001 | RX3i NIU with two serial ports and 20K of local logic. Module requires Universal base (IC695CHSxxx) and requires Ethernet module (IC695ETM001).NIU supports all RX3i I/O modules. |
| IC695PBM300 | RX3i PROFIBUS Master Module (must be installed on RX3i PCI bus). The mo dule supports PROFIBUS V1 Master functionality. |
| IC695PBS301 | RX3i Profibus Slave module supports V1 functionality. |
| IC695ALG306 | Isolated Thermocouple Input module provides six isolated differential thermocouple input channels. Each channel can be individually configured for inputs from: Thermocouple types: J, K, T, E, R, S, B, N, or C and Voltage: +/-150mV or +/-50mV. Module |
| IC695ETM001CA | RX3i Ethernet Mdl,10/100Mbits,Conformal Coated. |
| IC694DNM200 | DeviceNet Master Module for RX3i. Module can only be located in the CPUbase. The module is on the high speed serial bus. |
| IC695ALG728 | Analog Output HART Module, 8 channels,that is configurable for voltage, current, current/HART configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires high capacity ter |
| IC695PBM300CA | RX3i PROFIBUS Master, Conformal Coated, Module (must be installed on RX3i PCI bus). The module supports PROFIBUS V1 Master functionality. |
| IC695ALG106 | Isolated Analog module, 6 individual isolated channels are configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032. |
| IC695ALG626 | Analog Input HART module, 16 channels single ended, 8 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The |
| IC694BEM331 | RX3i Genius Bus Controller (supports I/O and Datagrams). Module connectsto the serial bus. Requires CPU firmware 2.9 or higher and requires Proficy Machine Edition Version 5.00 SP1A Logic Developer-PLC, Hot Fix 1or later for configuration. |
| IC694BEM331CA | Conformal Coated Genius Bus Controller |
| IC694ALG222CA | Conformal Coated Analog Voltage Input module 16 channels single ended/ 8channels differential |
| IC695RMX128 | RX3i Redundant Memory Xchange Module for High Availability. 2Megbytes of user shared memory. Dual Genius LAN is supported using application code that is located on the ge-ip.com/support website. |
| IC695PMM335 | PACMotion 4-axis servo motion controller for RX3i |
| IC695ALG508 | RX3i Isolated RTD Input module provides eight isolated differential RTD input channels. Each channel can be individually configured for 2, 3, 4 wire RTD or Resistance. Requires high capacity terminal block IC694TBB032 or IC694TBS032 |
| IC695RMX128CA | Conformal coated. RX3i Redundant Memory Xchange Module for High Availability. 2Megbytes of user shared memory. |
| IC695RMX228 | RX3I CONTROL MEMORY XCHANGE MDL, 10 KM |
| IC695ALG508CA | Conformal Coated RX3i Isolated RTD Input module provides eight isolated differential RTD input channels. Each channel can be individually configured for 2, 3, 4 wire RTD or Resistance. Requires high capacity terminal block IC694TBB032 or IC694TBS032 |
| IC695ALG808 | Isolated Analog Output module, 8 channels, that is configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032. |
| IC695ALG808CA | RX3i Isolated Analog Output module conformal coated, 8 channels, that is configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032. |
| IC695ALG312 | Isolated Thermocouple Input module provides twelve isolated differential thermocouple input channels. Each channel can be individually configured for inputs from: Thermocouple types: J, K, T, E, R, S, B, N, or C and Voltage: +/-150mV or +/-50mV. Mod |
| IC695ECM850 | RX3i IEC61850 communication module |
| IC695ALG112 | Isolated Analog module, 12 individual isolated channels are configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032. |
| IC695ALG112CA | RX3i Isolated Analog module, conformal coated, 12 individual isolated channels are configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032. |
| IC695ALG312CA | Conformal Coated. Isolated Thermocouple Input module provides twelve isolated differential thermocouple input channels. Each channel can be individually configured for inputs from: Thermocouple types: J, K, T, E, R, S, B, N, or C and Voltage: +/-150 |
| IC695NKT001 | RX3i Ethernet NIU Kit includes NIU (IC695NIU001) and Ethernet module (IC695ETM001). ENIU supports two serial ports and 20k of local logic. TheENIU must be installed in a IC695CHSxxx base. |
| IC695STK007 | RX3i Power PACkage 7 Starter Kit includes (one each IC695CPE305, IC695CHS012, IC695PSD040, IC646MPP101) |
| IC695NKT001CA | RX3i Ethernet NIU Kit Conformal Coated includes NIU (IC695NIU001) and Ethernet module (IC695ETM001). ENIU supports two serial ports and 20k of local logic. TheENIU must be installed in a IC695CHSxxx base. |
| IC695STK005 | RX3i Power PACkage 5 Starter Kit includes (one each IC695CPE305,IC695CHS012, IC695PSA040, IC646MPP101) |
| IC690RFH008 | 8 multimode reflective memory HUB, 24VDC |
| IC695CPE310 | CPE310 2 slot CPU, 1.1Ghz processor,10 Meg memory, 1 RS-232 port, 1 RS- 485 port,1 Ethernet port (SRTP programmer support only) and USB master port for application upload/download only.Replacement for IC695CPU310. CPE310 ships with Energy PAC (IC695A |
| IC695ALG412 | High Speed 12 channel isolated thermocouple module with increased noise rejection. Requires firmware and software 6.5 and higher. |
| IC695STK006 | RX3i Power PACkage 6 Starter Kit includes (one each IC695CPE305, IC695CHS012, IC695PSD040, IC695ETM001, IC646MPP101) |
| IC695CPE310CA | Conformal Coated. CPE310 2 slot CPU, 1.1Ghz processor,10 Meg memory, 1 RS-232 port, 1 RS- 485 port,1 Ethernet port (SRTP programmer support only) and USB master port for application upload/download only.Replacement for IC695CPU310. CPE310 ships with |
| IC695ALG412CA | Conformal Coated. High Speed 12 channel isolated thermocouple module with increased noise rejection. Requires firmware and software 6.5 and higher. |
| IC695STK004 | RX3i Power PACkage 4 Starter Kit includes (one each IC695CPE305, IC695CHS012, IC695PSA040, IC695ETM001, IC646MPP101) |
| IC695STK001 | RX3i Power PACkage 1 Starter Kit includes RX3i with software. (includesRX3i with software. (includes one each IC695CP305,IC695CHS012, IC695LRE001, IC695PSA040, IC695ETM001, IC694ACC300, IC694MDL940 and IC646MPP001.) Limited one RX3i starter kit per |
| IC695NKT002 | RX3i Ethernet NIU Kit with two Ethernet modules. |
| IC695STK011 | RX3i and RSTi Profinet Starter Kit. Limited to one per customer per customer site. Kit includes CPE305, 7 slot base, AC power supply, input and output module, Profinet controller, RSTi Profinet starter kit (STXKITPNS001)and Proficy Machine Edition. |
| IC695STK010 | RX3i Profinet Starter Kit. Limited to one per customer per customer site. Kit includes CPE305, 7 slot base, AC power supply, input and output module, Profinet controller, VersaMax Profinet slave, combination I/O and Proficy Machine Edition. |
| IC695NKT002CA | RX3i one NIU001 and two ETM001 Conformal |
| IC695STK002 | RX3i Power PACkage 2 Starter Kit includes RX3i and QuickPanel View 6 inch STD with software (one each IC695CPE305/ IC695CHS012/ IC69 5LRE001/ IC695PSA040/ IC695ETM001/ IC694ACC300/ IC694MDL940/ IC754VSI06STD/ BC646MQP001/ IC646MPP001 and DC power) |
| IC695CPU315 | 1Ghz CPU with 20Meg of memory 2 SERIAL PORTS (occupies two slots on system base). Battery not included, order external high capacity battery IC693ACC302 seperately. Estimate data retention is 30 days at 20C of continous battery back up. |
| IC695CPU320 | 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base). Battery not included, order external high capacity battery IC693ACC302 seperately. Estimate data retention is 30 days at 20C of continous battery back up. |
| IC695CPU315CA | RX3I 1GHZ CPU W/2 SER PORTS CONF COAT |
| IC695CRU320 | 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base) redundant CPU. External high capacity battery IC693ACC302 required. The CRU320 supports both Genius LAN and Ethernet LAN. Dual Genius LAN is supported by an applicati |
| IC695STK003 | RX3i Power PACkage 3 Starter Kit includes RX3i(CPE305)/ motion module (Servo andAmplifier sold seperately) and QuickPanel View 6 inch STD wi th software |
| IC695CRU320CA | Conformal coated. 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base) redundant CPU. External high capacity battery IC693ACC302 required. The CRU320 will only work with RX3i ENIU remote I/O and Genius LAN. |
| IC695CRU320QP | QuadPAC redundant controller. 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base). External high capacity battery IC693ACC302 required. |
| IC698ACC701 | RX7i CPU Lithium Battery and Spare Door |
| IC695ACC600 | RX3i Cold Junction Compensation Kit \ for Universal Analog Input IC695ALG600 |
| IC695ACC302 | Auxiliary Smart Battery Module for PACSystems. Provides low battery signal to the CPU. Module mounts external to the controller. |
| IC698ACC720 | Shielded double slot faceplate, package of six. |
| IC698ACC735 | Shielded single slot faceplate, package of six. |
| IC698CHS109 | RX7i 9 Slot Rack Front Mount |
| IC698CHS009 | RX7i 9 Slot Rear Mount Rack |
| IC698CHS017 | RX7i 17 Slot Rack Wall (Rear) Mount |
| IC698CHS117 | RX7i 17Slot Rack Front Mount |
| IC698PSA100 | RX7i Power Supply 100Watt 85-264VAC |
| IC698CHS117CA | RX7i 17Slot Rack Front Mount Conformal Coated |
| IC698CHS217 | RX7i 17 Slot Rack Rear I/O Mount |
| IC687BEM713 | Half Slot Bus Transmitter Module |
| IC698PSD300 | RX7i Power Supply 300Watt 24VDC |
| IC698PSA350 | RX7i Power Supply 350Watt 85-264VAC |
| IC698ETM001 | RX7i Standalone Ethernet Module 10/100 |
| IC698ETM001CA | RX7i 10/100 Ethernet Module Conformal Coated |
| IC698CMX016 | PACSystems RX7i Control Memory Xchange 16MB Memory |
| IC698RMX016 | PACSystems RX7i Redundant Memory Xchange 16MB Memory |
| IC687BEM731 | Single Slot GENIUS Bus Controller 1CH |
| IC687BEM731CA | Single Slot GENIUS Bus Controller 1 Channel for Series 90-70 or RX7i. Conformal Coated. |
| IC698RMX016CA | RX7I REDUNDANT MEMORY EXCHANGE 16MB CONFORMAL COATED |
| IC687RCM711 | Half Slot Redundant Communications Module for HSB Systems |
| IC698CRE030 | 600mHz CPU, Ethernet, Redundancy |
| IC698CPE030 | RX7i Pentium M CPU - 600mHz with 64 meg of user memory. No fan required.CPU includes built-in Ethernet with switch and 2 serial communication ports. |
| IC698CPE030CA | 600Mhz CPU with Ethernet, 64Megbytes of memory. Conformal Coated. |
| IC698CRE020 | PACSystems RX7i High Availability 700mHz CPU |
| IC698CRE020CA | RX7i 700mhz Redundant CPU w/Ethernet Conformal Coated |
| IC698CPE020 | RX7i 700mhz CPU with Ethernet 10/100 |
| IC698CRE040 | 1.8GHz CPU, Ethernet, Redundancy |
| IC698CPE040 | RX7i Pentium M CPU - 1.8Ghz with 64 meg of user memory. Fan required. CPU includes built-in Ethernet with switch and 2 serial communication ports. |
| ICRXIACCCPK01A | Energy Pack Capacitor Module |
| ICRXIACCEPK01A | Energy Pack for RXi Controller |
| ICRXIACCIDM01A | RXI INTELLIGENT DISPLAY MODULE |
| ICRXICTLKITA | RXI CONTROLLER STARTER KIT |
| ICRXICTL000 | RXI CONTROLLER |
| ICRXIDIXNE19LCTA | PACSystems RXi Display/Panel PC. Memory Type SSD. |
| ICRXIDIXNM19LCTA | PACSystems RXi Display/Panel PC. Memory Type HDD. |
| ICRXIACCBPL | RXI Box IPC and Controller Baseplate |
| ICRXIBN0M000A | RXI Box IPC 250GB HD no os |
| ICRXIBN7M000A | RXI BOX IPC 250GB HD WIN 7 PRO |
| ICRXIBN0E000A | RXI Box IPC 32 GB SSD no os |
| ICRXIBN7EKITA | RXi Box IPC Starter Kit. Includes 32 GB SSD version with Win 7 Preloaded, DIN Mounting Plate and Power Supply. Power supply is for desktop use only. Refer to manual GFK-2785 for permanent installation guidelines. |
| ICRXIBN7E000A | RXI Box IPC 32 GB SSD win 7 pro |
| ICRXIFF0F111A | RXi Box IPC EP, Cel 1.4GHz, 128GB SSD |
| ICRXIFC0P111A | RXi Box IPC EP, Flat (wall) monting, 24VDC, Intel Core 2 Duo 2.26GHz, 4GB DDR3, 100GB SATA, no operating system |
| ICRXIFC7P111A | RXi Box IPC EP, Flat (wall) monting, 24VDC, Intel Core 2 Duo 2.26GHz, 4GB DDR3, 100GB SATA, Win 7 Professional |
| ICRXIFC0E111A | RXi Box IPC EP, Flat (wall) monting, 24VDC, Intel Core 2 Duo 2.26GHz, 4GB DDR3, 32GB SSD, no operating system |
| RXE2N0F7H132A | RXE 2Slot,i7-2,5GHz,320GB,Win7 |
| ICRXISC7E111A | RXi Box IPC EP, Slim (Vertical/Bookshelf) mount, 24VDC, Intel Core 2 Duo 2.26 GHz, 4GB DDR3, 32GB SSD, Win 7 Professional |
| ICRXIFC7E111A | RXi Box IPC EP, Flat (wall) monting, 24VDC, Intel Core 2 Duo 2.26GHz, 4GB DDR3, 32GB SSD, Win 7 Professional |
| RXE2N0F8H132A | RXE 2Slot,i7-2,1GHz,320GB |
| IC693ACC310 | Filler Module, Blank Slot |
| IC693ACC338 | CPU364 FACEPLATE KIT CONTAINS 5 EACH FRONT PLASTIC AND LABELS |
| IC693ACC307 | I/O Bus Terminator Plug |
| IC693ACC400 | Expanded battery backup for Series 90-30 CPUs. Quantity 1. 8.5 Amp hour battery for Series 90-30 CPU311, 313, 323 and CPU36x type only. Not compatible with Series 90-30 CPU37x CPUs. The battery mounts on power supply and extends the depth of the s |
| IC693ACC320 | Spare Parts Kit (Power Supply) |
| IC693ACC319 | Spare Parts Kit (I/O, CPU, PCM) |
| IC693ACC301 | Replacement Battery, CPU & PCM (qty 2) |
| IC693ACC333 | TBQC Base for IC693MDL340 |
| IC693ACC329 | TBQC Base for IC693MDL645, IC693MDL646, and IC693MDL240 |
| IC693ACC312 | Extended battery (1.45 Amp-hours) for Series 90-30 CPU memory backup. The Battery Module replaces the standard CPU RAM backup battery in your control system. Approximately 20% more capacity than the IC693ACC301. Qty of 2 batteries. |
| IC693ACC337 | TBQC Base for IC693MDL654/655/752/753 |
| IC693ACC332 | TBQC Base for IC693MDL940 |
| IC693ACC315 | Battery Adapter Kit (battery not included) for CPU31* and CPU32* |
| IC693ACC317 | Connector Kit, 24 Pin, Qty (10), Crimp Type (For MDL654, 655, 752, 753 ) |
| IC693ACC316 | Connector Kit, 24 Pin, Qty (10), Solder Eyelet (For MDL654, 655, 752, 753) |
| IC693MLX000 | Series 90-30 I/O Modules Label Kit (various quantities) |
| IC690CRG001 | Battery charger. Compatible with rechargable battery (IC690RBT001) only. The rechargable battery is compatible with PAC controllers, Series 90-30 and Series 90-70. |
| IC693CHS397 | Base, CPU, 5 Slots, Use With CPU331/CSE331 and above |
| IC690RBT001 | Rechargable battery is compatible with IC690CRG001 battery charger only. The rechargable battery is compatible with PAC controllers, Series 90-30 and Series 90-70. |
| IC693ACC302 | High capacity battery pack. The new Auxiliary Battery Pack (IC693ACC3 02) will enable PAC Controllers, Series 90-30 <(>&<)> Series 90-70 CPUs (except CPU374) to go up to 75 months (refer to RX3i and RX7i user manual for exact length of data retentio |
| IC693MDL634 | 24 Vdc Input, Negative/Positive Logic (8 Points) |
| IC693ACC318 | Connector Kit, 24 Pin, Qty (10), Ribbon Type (For MDL654, 655, 752, 75 3) |
| IC693ACC350 | Redundant Power Supply Adapter (RPSA) Module. The RPSA replaces the p ower supply on a CPU base or expansion base and connects to a Redundan t Power Supply Base. |
| IC693MDL732 | 12/24 Vdc Output, 0.5 Amp, Positive Logic (8 Points) |
| IC693CHS398 | Base, Expansion, 5 Slots |
| IC693MDL733 | 12/24 Vdc Output, 0.5 Amp, Negative Logic (8 Points) |
| IC693MDL230 | 120 Vac Isolated Input (8 Points) |
| IC693MDL230CA | Conformal Coated Input module, 120VAC 8 point isolated. |
| IC693MDL231 | 240 Vac Isolated Input (8 Points) |
| IC693MDL930 | Relay Output, Isolated, 4 Amp (8 Points) |
| IC694MDR390 | Mixed I/O, 24Vdc Input (8 points), Relay Output (8 points) |
| IC693MDL730 | 12/24 Vdc Output, 2 Amp, Positive Logic (8 Points) |
| IC693MDL241 | 24 Vac/Vdc Input (16 Points) |
| IC693ACC760 | Solenoind Valve Module Forcing Pendent |
| IC693MDL731 | 12/24 Vdc Output, 2 Amp, Negative Logic (8 Points) |
| IC693MDL645 | 24 Vdc Input, Neg/Pos Logic (16 Points) |
| IC693CPU311 | 5-Slot Base With CPU in base (6K Bytes User Program) Battery included |
| IC693MDR390 | Mixed I/O, 24Vdc Input (8 points), Relay Output (8 points) |
| IC693MDL646 | 24 Vdc Input, Neg/Pos Logic, 1 msec Filter (16 points) |
| IC693MDL930CA | Conformal Coated Relay Output module, 4 amp 8 point isolated |
| IC693CBL302 | I/O Base expansion 50 feet (15 meters), continuous shield with built in terminator. |
| IC693MDL741 | 12/24 Vdc Output, 0.5 Amp, Negative Logic (16 Points) |
| IC693PWR321 | Power Supply, 120/240 Vac, 125 Vdc, Standard, Battery not included. B attery is now included in the CPU backplane box. |
| IC693MDL632 | 125 Vdc Input (8 Points) |
| IC693MDL632CA | Conformal Coated Input module 125 VDC 8 point NEG/POS logic. |
| IC693MDL390 | 120/240 Vac Isolated Output, 2 Amp (5 Points) |
| IC693MDL740 | 12/24 Vdc Output, 0.5 Amp, Positive Logic (16 Points) |
| IC693PWR331 | Power Supply, 24 Vdc, High Capacity. Battery not included. Battery is now included in the CPU backplane box. |
| IC694MDL648 | 48VDC Input, Neg/Pos Logic, 1 msec filter, Neg/Pos Logic (16 points) |
| IC693MDL940CA | Conformal Coated Relay Output module 2 amp, non isolated 16 points. |
| IC690RBK001 | Rechargable battery kit. Includes battery (IC690RBT001) and battery charger (IC690CRG001). The rechargable battery is compatible with PAC controllers, Series 90-30 and Series 90-70. |
| IC694ACC311 | Terminal blocks, 20 terminal (qty 6) for IC694xx I/O modules only. |
| IC693PWR332 | Series 90-30 12VDC Power Supply. 30 watt |
| IC693CHS391 | Base, CPU, 10 Slots, Use With CPU331/CSE331 and above |
| IC693MDL748 | 48VDC Output, 0.5 Amps, Positive Logic (8 points) |
| IC693ACC311 | Terminal Blocks (qty 6) |
| IC693MDL940 | Relay Output, 2 Amp (16 Points) |
| IC693PWR328 | Power Supply, 48 Vdc, Standard. Battery not included. Battery is now included in the CPU backplane box. |
| IC693MAR590 | Mixed I/O, 120Vac Input (8 points), Relay Output (8 points) |
| IC693MDL330 | 120/240 Vac Output, 2 Amp (8 Points) |
| IC693CHS397CA | Conformal Coated 5 slot CPU base. |
| IC693ACC300 | Input Simulator Module |
| IC693MDL648 | 48VDC Input, Neg/Pos Logic, 1 msec filter, Neg/Pos Logic (16 points) |
| IC693MDL240 | 120 Vac Input (16 Points) |
| IC693MDL241CA | Conformal Coated Input 24 VAC 16 points. |
| IC693MDL645CA | Conformal Coated Input module 24VDC 16 point POS/NEG logic |
| IC693CPU311CA | Conformal Coated CPU311 5 slot base. CPU built into base. |
| IC693CHS392 | Base, Expansion, 10 Slots |
| IC693CHS398CA | Conformal Coated 5 slot expansion base |
| IC693MDL654 | 5/12 Vdc (TTL) Input, Neg/Pos Logic, (32 points) |
| IC693MDL752 | 5/12/24 Vdc (TTL) Output, Neg Logic, (32 points) |
| IC693MDL734 | 125 Vdc Output, (6 Points) |
| IC693MDL734CA | Conformal Coated Output module 125VDC, 1amp, 6 point, isolated per point |
| IC693PWR321CA | Conformal Coated Power Supply 120/240VAC, standard. |
| IC693MDL655CA | Conformal Coated Input module 24 VDC POS/NEG logic 32 points. 1msec filter. Interface is Fujitsu connector. |
| IC693MDL753 | 12/24 Vdc Output, Pos Logic (32 Pts) |
| IC693MDL390CA | Conformal Coated OUTPUT module 120/240 VAC 2A 5 point, isolated per point. |
| IC693MDL655 | 24 Vdc Input, Neg/Pos Logic, 1 ms, (32 pts) |
| IC693PWR331CA | Conformal Coated Power Supply 24VDC, added capacity |
| IC693MDL741CA | Conformal Coated Output module 12/24 VDC 0.5 amp 16 points NEG logic. |
| IC693MDL660 | 24VDC Input Module 32 point. The module requires a terminal block (IC694TBB032 box style or IC694TBS032 springclamp style terminal block).Terminal block is sold seperately. Input filter time is configurable 0.5ms, 1.0ms, 2.0ms, 5.0ms, 10.0ms, 50.0ms |
| IC693MDL916 | Output module, Isolated Relay, Normally Open, 4 Amp, 16 point. Requires High Density Terminal Block (IC694TBBx32 or IC694TBSx32). Compatible with RX3i and Series 90-30. |
| IC693MDL758 | Output module, 12/24VDC POS logic, 32 points, 0.5amp per point. Module requires terminal block IC694TBx032. Terminal block doesn't ship with module. |
| IC693PWR322 | Power Supply, 24/48 Vdc, Standard. Battery not included. Battery is n ow included in the CPU backplane box. |
| IC693PWR330 | Power Supply, 120/240 Vac, 125 Vdc, High Capacity. Battery not include d. Battery is now included in the CPU backplane box. |
| IC693MDL742 | 12/24 Vdc Output, 1 Amp, Positive Logic (16 Points), Fused |
| IC693MDL740CA | Conformal Coated Output module 12/24 VDC 0.5 amps 16 points POS logic. |
| IC693MDL931 | Relay Output, 8 Amp Form B/C contacts, Isolated in groups of 4 |
| IC694MDL648CA | Conformal Coated 48VDC Input, Neg/Pos Logic, 1 msec filter, Neg/Pos Logic (16 points) |
| IC693CPU313 | 5-Slot Base With Turbo CPU in base (.6 msec), 1K Registers, (12K Bytes User Program) Battery included |
| IC693MDL646CA | Conformal Coated Input module 24 VDC 16 point POS/NEG ogic. 1msec filtering. |
| IC693MDL240CA | Conformal Coated Input module 120 VAC 16 points |
| IC693MDL340 | 120 Vac Output, 0.5 Amp (16 Points) |
| IC693MDL654CA | Conformal Coated Input module 32 points 5/12VDC TTL POS/NEG logic. Termination is a Fujitsu connector. |
| IC693MDL753CA | Conformal Coated Output module, 12/24VDC POS logic, 32 points. Interfaceis Fujitsu connector. |
| IC693MDL752CA | Conformal Coated Output module, 5/12-24VDC, 32 point NEG logic. |
| IC693CHS391CA | Conformal Coated CPU 10 slot base |
| IC693MDL330CA | 120/240 Vac Output, 2 Amp (8 Points). Conformal Coated. |
| IC693PWR330CA | Conformal Coated Power Supply 120/240VAC 125VDC, added capacity. |
| IC693MDL250 | 120 Vac Isolated Input (16 points). Module requires a terminal block IC694TBBx32 or IC693TBSx32). |
| IC693MDL758CA | Conformal Coated version output module, 12/24VDC POS logic, 32 points, 0.5amp per point. Module requires terminal block IC694TBx032. Terminal block doesn't ship with module. |
| IC693CPU313CA | Conformal Coated CPU313 5 slot base. CPU built into base. |
| IC693CHS392CA | Conformal Coated 10 slot expansion base. |
| IC693CHS399 | Base, Remote Expansion, 5 Slots (700 ft.) |
| IC693MDL754 | 12/24VDC Output (0.75 amps per point) Module 32 point. The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block). Terminal block is sold seperately. Output response Time is 0.5ms. |
| IC693MDL340CA | Conformal Coated 120/240 Output module, 0.5A,16 points |
| IC693ACC305 | EEPROM Chips (qty 4) |
| IC693ALG220 | Analog Input, Voltage (+/-10VDC, 12bit), 4 Channels |
| IC693ALG391 | Analog Output, Current, 2 Channels |
| IC693ALG390 | Analog Output, Voltage, 2 Channels |
| IC693ALG221 | Analog Input, Current, 4 Channels |
| IC693MDL260 | 32 Point 120VAC Input Module. Requires terminal block IC694TBxx32. |
| IC693CHS393 | Base, Remote Expansion, 10 Slots (700 ft.) |
| IC693CPU323 | 10-Slot Base With Turbo CPU in base (.6 msec) 12K bytes User Program, Battery included |
| IC693MDL350 | 120/240 Vac Isolated Output, 2 Amp (16 Points). Module requires a terminal block (IC694TBBx32 or IC693TBSx32). |
| IC693APU300 | High Speed Counter (HSC) |
| IC693APU302 | 2-axis APM motion controller module |
| IC693ALG391CA | Conformal Coat Analog Output module, two channel current. |
| IC693ALG220CA | Conformal Coated Analog Input module, four point voltage. |
| IC693ALG221CA | Conformal Coated Analog Input module, four point current. |
| IC693CPU323CA | Conformal Coated CPU323 10 slot base. CPU built into base. |
| IC693BEM320 | I/O Link Interface Module (Slave) |
| IC693MDL760 | Solenoid Valve Output (11 Points)/ 24VDC Output ,0.5 Amp, Positive Log ic (5 Points) |
| IC693DNS201 | DeviceNet Slave Module |
| IC693CMM302CA | Conformal Coating Enhanced Genius Communications module. |
| IC693CPU350 | CPU 350 Module (32K Bytes user memory, 4K I/O, 8 Racks), no built-in S erial Ports .22msec/K, The battery for the CPU is now included in the CPU backplane box. |
| IC693ALG442 | Analog Combo Module 4IN/2OUT |
| IC693CMM302 | Communication Module, Genius (1 Kbyte) GCM+ (no datagram support) |
| IC693CPU350CA | Conformal Coated CPU350, 32Kbytes of memory |
| IC693NIU004 | Series 90-30 Ethernet NIU (Ethernet I/O) |
| IC693BEM321 | I/O Link Interface Module (Master) |
| IC693ALG222 | Analog Input, Voltage 16 Single/8 Differential Channels |
| IC693PBM200 | Profibus DP Master Module |
| IC693NIU004CA | Series 90-30 Ethernet NIU Conformal Coated. 10/100Mbit Ethernet. |
| IC693APU305 | I/O Processor Module |
| IC693ALG223 | Analog Input, Current, 16 Single Channels |
| IC693ALG392 | High Density Analog Output (8 Channels) voltage and current. |
| IC693ALG442CA | Conformal Coated Analog module, four in and two out. |
| IC693ALG222CA | Conformal Coated Analog Voltage Input module, 16 channels single ended/8 channels differential. |
| IC693ALG223CA | Conformal Coated Analog Current Input module, 16 channel single ended/8 channel differential. |
| IC693ALG392CA | Conformal Coated Analog Output module, eight channels voltage/current. |
| IC693PBS201 | Profibus DP Slave Module |
| IC693CPU360 | CPU 360 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks), no built-in Serial Ports .22msec/K, The battery for the CPU is now i ncluded in the CPU backplane box. |
| IC693BEM331 | Genius Bus Controller (supports I/O and Datagrams) |
| IC693CPU360CA | Series 90-30 CPU360 with Conformal Coated. |
| IC693DNM200 | DeviceNet Master Module |
| IC693CPU370 | CPU370 Plus (240K Bytes configurable user memory). Supports EZ Store (IC200ACC003). Requires a high capacity power supply and recommend high capacity battery. Note: The CPU37x CPUs may not work with Horner Electric modules due to the speed of th |
| IC693BEM331CA | Conformal Coated Genius Bus Controller |
| IC693CPU363 | CPU 363 Module (240K Bytes configurable user memory), The battery for the CPU is now included in the CPU backplane box. |
| IC693CPU363CA | CPU363 conformal coated. CPU supports 240K of memory, 2 serial ports and up to 4,096 I/O. |
| IC693CPU367 | CPU 367Module (240K Bytes configurable Supports Profibus DP Slave (Version 1 supported). One Profibus port and one RS-232 service port. |
| IC693PTM101CA | Conformal Coated Power Transducer Module |
| IC693TCM302 | Temperature Control Module |
| IC693TCM303 | Temperature Control Module Extended Range |
| IC693CPU366 | CPU 366 Module (240K Bytes configurable Supports Profibus DP Master (Version 1 supported). One Profibus port and one RS-232 service port. |
| IC693CPU372 | CPU372 Plus Web Enabled controller (120K Bytes configurable user memory), embedded Ethernet 10/100Mbs with built-in switch. Supports EZ Store (IC200ACC003). Note: The CPU37x CPUs may not work with Horner Electric modules due to the speed of the p |
| IC693CPU364 | CPU364 |
| IC693CPU374 | CPU 374 Module (240K Bytes configurable user memory) The battery for the CPU is now included in the CPU backplane box, Embedded Ethrnet 10/ 100Mbs w/built-in switch. No serial ports. Note: The CPU37x CPUs may not work with Horner Electric modules |
| IC693CPU374CA | Conformal Coated.CPU 374 Module (240K Bytes configurable user memory) The battery for the CPU is now included in the CPU backplane box, Embedded Ethrnet 10/ 100Mbs w/built-in switch. No serial ports. |
| IC697ACC732 | Top PWA Cover - CPU77x and CPU78x (Qty 2) |
| IC697ACC735 | Blank Slot Filler, half slot integrators rack (qty. 6) |
| IC697ACC702 | I/O Bus Terminator Plug |
| IC697ACC727 | Top and Bottom PWA Cover - GBC (Quantity 2) |
| IC697ACC728 | Top and Bottom PWA Cover - BTM/BTR (Quantity 2) |
| IC697ACC729 | Top and Bottom PWA Cover - I/O Link |
| IC697ACC820 | DIN Rail Transition Module 32 Pin for IC697Vxxxxx modules |
| IC697ACC726 | Top PWA Cover, CPU-Style, (Quantity 6) |
| IC697ACC730 | Spare Slot Terminal Strip Retainer (Quantity 1) |
| IC697ACC701 | Replacement Battery, CPU & PCM (qty 2) |
| IC697ACC723 | Clear Plastic Doors (qty 6) |
| IC697ACC821 | DIN Rail Transition Module 64 Pin for IC697Vxxxxx modules |
| IC697ACC822 | DIN Rail Transition Module 96 Pin for IC697Vxxxxx modules |
| IC697ACC621 | 115VAC fan tray to be used with Series 90-70 or RX7i short racks. |
| IC697ACC624 | 230VAC fan tray for the Series 90 70 or RX7i short racks. |
| IC697MLX000 | Series 90-70 Labels Kit |
| IC697ACC644 | 24VDC fan tray for Series 90-70 or RX7i short racks. |
| IC697ACC744 | Rack Cooling Fan, 24 VDC |
| IC697ACC721 | Rack Cooling Fan, 115 Volt |
| IC697ACC722 | VME Backplane Connector, Interrupt Jumper (qty 6) |
| IC697ACC720 | Blank Slot Filler, full slot rack (qty. 6) |
| IC697ACC724 | Rack Cooling Fan, 230 Volt |
| IC693MDL740CA | Conformal Coated Output module 12/24 VDC 0.5 amps 16 points POS logic. |
| IC697MDL251 | 120 Vac Input (16 Points) Non-isolated |
| IC697PWR720 | Replacement Power Supply Adaptor |
| IC694ALG220CA | Conformal Coated Analog Input Voltage module, 4 channels. |
| IC697MDL640 | 125 Vdc Input (16 Points) |
| IC697BEM711 | Bus Receiver (Required for Each Local Expansion Rack) |
| IC697ACC715 | Kit, VME Integrator, J2 Backplane Mounting |
| IC697CHS790 | Rack, 9 Slots, Rear Mount |
| IC697CHS750 | Rack, 5 Slots, Rear Mount |
| IC697CHS791 | Rack, 9 Slots, Front Mount |
| IC687BEM713 | Half Slot Bus Transmitter Module |
| IC697MDL652 | 12 Vdc Input, Positive/Negative Logic (32 Points) |
| IC697ACC700 | Terminal Block, 40 Contacts (qty 6) |
| IC697MDL653CA | INPUT MOD 24VDC 32PT POS/NEG CONFORMAL COATED |
| IC697MDL240 | 120 Vac Isolated Input (16 Points) |
| IC697MDL740 | 24/48 Vdc Output, 2 Amp, Positive Logic (16 Points) |
| IC697MDL252 | 12 Vac Input (32 Points) |
| IC697MDL253 | 24 Vac Input (32 Points) |
| IC697MDL254 | 48 Vac Input (32 Points) |
| IC697MDL340 | 120 Vac Output, 2 Amp (16 Points) |
| IC697ACC775 | Gold plated analog terminal blocks for IC697ALG234, IC697ALG324, IC697ALG444 and IC697ALG445. Qty 6 blocks in package. |
| IC697MDL241 | 240 Vac Isolated Input (16 Points) |
| IC697VHD001 | 10Gig Hard Drive for Single Board Computer (IC697VSC096) |
| IC697MDL653 | 24 Vdc Input, Positive/Negative Logic (32 Points) |
| IC697PWR710 | Power Supply, 120/240 Vac, 125VDC, 50 Watts |
| IC697PWR711CA | BUS RECEIVER Conformal Coated |
| IC697MDL940 | Relay Output, Signal, 2 Amp (16 Points) |
| IC697MDL651 | 5 Vdc (TTL) Input (32 Points) |
| IC697MDL654 | 48 Vdc Input, Positive/Negative Logic (32 Points) |
| IC697MDL341 | 120/240 Vac Isolated Output, 2 Amp (12 Points) |
| IC697BEM713 | Bus Transmitter (Also Provides Parallel Programming Port) |
| IC697MDL752 | 12 Vdc Output, 0.5 Amp, Positive Logic (32 Points) |
| IC697CHS782 | Integrators Rack, 17 Slots, Rear Mount |
| IC697CHS783 | Integrators Rack, 17 Slots, Front Mount |
| IC697ALG440 | Analog Input Expander, Current, 16 Channels |
| IC697MDL250 | 120 Vac Input (32 Points) |
| IC697MDL652CA | 12 Vdc Input, Positive/Negative Logic (32 Points) Conformal coated. |
| IC697MDL750 | 24/48 Vdc Output, 0.5 Amp, Positive Logic (32 Points) |
| IC697MDL753 | 5/48 Vdc Output, 0.5 Amp, Negative Logic (32 Points) |
| IC697ALG230 | Analog Input, Voltage/Current, 8 Channels |
| IC697MEM713 | Expansion RAM, 64K Bytes, CMOS (Used w/77X CPUs and PCM) |
| IC697PCM712RR | VME Programmable Coprocessor |
| IC697HSC700 | High Speed Counter |
| IC697VDQ120 | Discontinued. Replacement is Embedded VMIVME-2131-110 Not UL Approved. Contact GE Embedded for more details. |
| IC697MDL350 | 120 Vac Output, 0.5 Amp (32 Points) |
| IC697MDL671 | Interrupt Input Module, 14 points |
| IC697MDL752CA | 12 Vdc Output, 0.5 Amp, Positive Logic (32 Points) Conformal Coated |
| IC697MDL752CAC | OUTPUT 12VDC 0.5A 32PT CONF COAT |
| IC697CHS770 | Redundant Rack (Dual) Rear Mount |
| IC697CHS771 | Redundant Rack (Dual) Front Mount |
| IC697PWR711 | Power Supply, 120/240 Vac,125VDC, 100 Watts |
| IC697PWR711FFM | Power Supply, 120/240 VAC, 100 Watts, FM Approved |
| IC697BEM761 | Series 90-70 I/O Interface (Used with Series Six Plus PLC) |
| IC697PWR724 | Power Supply, 24 Vdc, 90 Watts |
| IC687BEM731 | Single Slot GENIUS Bus Controller 1CH |
| IC697BEM733 | Series 90-70 Genius Remote I/O Scanner |
| IC697VDR150 | Discontinued. Replacement is Embedded VMIVME-2210-110 Not UL Approved. Contact GE Embedded for more details. |
| IC697CMM711CA | COMMUNICATION COPROCESSOR MODULE CONFORMAL COATED |
| IC697MEM731 | Expansion RAM, 128K Bytes, CMOS, 32 Bit (Used w/78X CPUs) |
| IC697ALG441 | Analog Input Expander, Voltage, 16 Channels |
| IC697VDD100 | Discontinued. Replacement is Embedded VME-1182A-020000. Contact GE Embedded for more details. |
| IC697VDD125 | Discontinued. Replacement is Embedded VME-1182-060000 . Contact GE Embedded for more details. |
| IC697MEM715 | Expansion RAM, 128K Bytes, CMOS (Used w/77X CPUs and PCM) |
| IC697ALG444 | Analog Input Expander, Current, 16 Channels gold plated terminal. WARNING: The IC697ALG444 module must be matched with IC697ACC775 terminal block ONLY. IC697ACC775 is included with the module. |
| IC697ALG445 | Analog Input Expander, Voltage, 16 Channels gold plated terminal. WARNING: The IC697ALG445 module must be matched with IC697ACC775 terminal block ONLY. IC697ACC775 is included with the module. |
| IC697VDR151 | Discontinued. Replacement is Embedded VMIVME-2210-100 Not UL Approved. Contact GE Embedded for more details. |
| IC697ALG320 | Analog Output, Voltage/Current, 4 Channels |
| IC697ALG324 | Analog Output, Voltage/Current, 4 Channel sgold plated terminal. WARNING: The IC697ALG324 module must be matched with IC697ACC775 terminal block ONLY. IC697ACC775 is included with the module. |
| IC697VAL216 | Remplacement is Embedded VME-3122A-420000.Contact GE IP Embedded for details. |
| IC697ALG234 | Analog Input, Voltage/Current, 8 Channels gold plated terminal. WARNING: The IC697ALG234 module must be matched with IC697ACC775 terminal block ONLY. IC697ACC775 is included with the module. |
| IC697VAL304 | Discontinued future replacement with Embedded VME-6550. Contact GE IP Embedded for details. |
| IC697VAL324 | Discontinued, replacement is Embedded VME-6550. Contact GE IP Embedded for details. |
| IC697CMM711 | Communications Coprocessor, CCM, RTU, SNP, and SNPx Protocols |
| IC697VRD008 | Functionality on future product VME-6600. Contact GE IP Embedded for more information. |
| IC697VAL132 | Discontinued. Replaced VME-3125A-200000 different front panel connector. Contact GE Embedded for more details. |
| IC697VAL134 | Module discontinued. Replacement is VME-3125A-100000 different front panel connector. Contact GE IP Embedded for details. |
| IC687RCM711 | Half Slot Redundant Communications Module for HSB Systems |
| IC697VAL232 | Replacement is Embedded VME-3122A-410000. Contact GE IP Embedded for details. |
| IC697PWR748 | Power Supply, 48 Vdc, 90 Watts |
| IC697PCM711MP | Modified Series 90-70 PCM for OEMs |
| IC697CMM712 | Serial Communications Module for State Logic |
| IC697CPU731 | CPU, 12 MHz, 512 Discrete I/O, Fixed Memory (32K Bytes) |
| IC697CMM742 | Ethernet Inferface for Series 90-70, Type 2. The CMM742 no longer supports the AAUI/AUI interface. If the AAUI/AUI is required, please contact GE Global Customer Care. |
| IC697BEM731 | Series 90-70 Genius I/O Bus Controller |
| IC697CMM741 | Series 90-70 MMS or TCP/IP Ethernet Lan Interface |
| IC697BEM731CA | Series 90-70/RX7i Genius Bus Controller, 1 channel. Conformal Coated. |
| IC697PCM711 | Programmable Coprocessor |
| IC697PCM711WMP | Programmable Coprocessor Modified for use by OEMs |
| IC697RCM711 | Hot Standby Redundancy Communications Module |
| IC697VAL306 | Discontinued, future replacement is Embedded VME-6500. Contact GE IP Embedded for details. |
| IC697VRM015 | Discontinued, no replacement. Reflective Memory with 256Kbyte memory <(>&<)> 512 transfer FIFO. 170MBaud fiber optic network. Supports up to 256 nodes over 2,000 meters |
| IC697MEM733 | Expansion RAM, 256K Bytes, CMOS, 32 Bit (Used w/78X CPUs) |
| IC697MEM717 | Expansion RAM, 256K Bytes, CMOS (Used w/77X CPUs and PCM) |
| IC697VAL308 | Discontinued, future replacement is Embedded VME-6550. Contact GE IP Embedded for details. |
| IC697VAL318 | Discontinued, replacement is Embedded VME-6550. Contact GE IP Embedded for details. |
| IC697VAL328 | Discontinued, replacement is Embedded VME-6550. Contact GE IP Embedded for details. |
| IC697BEM721 | I/O Link Interface Module for the Series 90-70 |
| IC697VSC096 | Single Board Computer, with 32Mbyte SDRAM & 96 Mbyte Flash. NO OPERAT ING SYSTEM PRE LOADED |
| IC697VAL348 | Discontinued, future replacement is Embedded VME-6500. Contact GE IP Embedded for details. |
| IC697CPU780 | Hot Standby Redundancy CPU, 386, 12K Discrete I/O, Exp. Mem., Floating Pt. |
| IC697MEM732 | Exp. RAM, 256K Bytes, Non-volatile Flash, 32 Bit (Used w/78X CPUs) |
| IC697VAL264 | Relplacement is Embedded VME-3122A-400000. Contact GE IP Embedded for details. |
| IC697ADS701 | CIMPLICITY 90-ADS Package (First System) |
| IC697VAL301 | Replacement is Embedded VME-4132-010000 Contact GE IP Embedded for details. |
| IC697MEM735 | Expansion RAM, 512K Bytes, CMOS, 32 Bit (Used w/78X CPUs) |
| IC697MEM719 | Expansion RAM, 512K Bytes, CMOS (Used w/77X CPUs and PCM) |
| IC697CPX772 | CPU, 96 MHz, 2K Discrete I/O, 512K byte fixed user memory |
| IC697CPU782 | CPU, 16 MHz, 12K Discrete I/O, Expandable Memory, Floating Pt |
| IC697CPX782 | CPU, 96 MHz, 12K Discrete I/O, 1M byte fixed user memory |
| IC697CPX935 | CPU, 96 MHz, 12K Discrete I/O, 1M byte fixed user memory |
| IC697CGR772 | Hot Standby Genius Dual Bus CPU, 486DX4, 2K Discrete I/O, 512K byte fi xed user memory, Floating Pt. |
| IC697CPU788 | GMR Redundancy CPU, 386, 100 Triplex (voted) I/O, |
| IC697BEM741RR | FIP Bus Controller 9070 |
| IC200TBM001 | I/O auxilary barrier style |
| IC200CHS015 | I/O interposing spring style |
| IC200PWR202 | POWER SUPPLY WITH EXPANDED 3.3VDC 12VDC INPUT |
| IC200CHS025 | Compact I/O carrier spring style |
| IC200PWB001 | POWER SUPPLY BOOSTER CARRIER |
| IC200CHS005 | I/O carrier spring style |
| IC200PWR002 | POWER SUPPLY WITH EXPANDED 3.3VDC 24VDC INPUT |
| IC200ACC003 | EZ program store, CPU RS485 port update device, VersaMax CPU001,002/00 5/E05 and Series 90-30 CPU374/CPU372/CPU370 |
| IC200CHS003 | I/O carrier connector style |
| IC200PWR101 | POWER SUPPLY 120/240VAC INPUT |
| IC200CHS001 | I/O carrier barrier style |
| IC200CHS022 | Compact I/O carrier box style |
| IC200CHS006 | Communications carrier |
| IC200CHS006CA | Conformal coated Communications Carrier |
| IC200CHS002 | I/O carrier box style |
| IC200ERM002 | EXPANSION RECEIVER NON-ISOLATED |
| IC200PWR102 | POWER SUPPLY WITH EXPANDED 3.3VDC 120/240VAC INPUT |
| IC200CHS014 | I/O interposing box style Thermocouple cold junction compensation |
| IC200MDL140 | Input 120VAC (1 group of 8) 8 point. |
| IC200PWR011 | Isolated 24 VDC Power Supply |
| IC200ACC302 | I/O input simulator |
| IC200PWR012 | Isolated 24 VDC Expanded 3.3V Power Supply |
| IC200MDL930 | Output relay 2.0 amps per point isolated form A, 8 points |
| IC200MDL144 | Input 240VAC isolated 4 point. |
| IC200ETM001 | EXPANSION TRANSMITTER, includes IC200ACC201 termination plug. |
| IC200PWR201 | POWER SUPPLY 12VDC INPUT |
| IC200MDL329 | Output 120VAC 0.5 amp per point isolated 8 points |
| IC200MDL631 | Input 125VDC POS/NEG logic isolated 8 point |
| IC200MDL643 | Input 5/12VDC POS/NEG logic (2 groups of 8) 16 points |
| IC200MDD843 | Mixed 24VDC POS LOG input group 10 point / relay output 2 amp output 6 point. |
| IC200MDL640 | Input 24VDC POS/NEG logic (2 groups of 8) 16 points |
| IC200MDL740 | Output 12/24VDC POS LOGIC 0.5 amp per point(1 group of 16) 16 points |
| IC200MDL743 | Output 5/12/24VDC NEG LOGIC 0.5A per point (1 group of 16) 16 points |
| IC200CHS003CA | I/O CARRIER CONNECTOR STYLE CONFORMAL COATED |
| IC200CHS022CA | Compact I/O carrier box style |
| IC200PWB001CA | POWER SUPPLY BOOSTER CARRIER - CONFORMAL COATED |
| IC200PWR002CA | POWER SUPPLY WITH EXPANDED 3.3VDC 24VDC INPUT CONFORMAL COATED |
| IC200ERM001 | Expansion receiver isolated |
| IC200MDL143 | Input 120VAC isolated 8 point. |
| IC200MDL635 | Input 48VDC POS/NEG logic (2 groups of 8) 16 points |
| IC200MDL141 | Input 240VAC (1 group of 8) 8 point. |
| IC200MDL244 | Input 240VAC isolated 8 point |
| IC200DTX200 | Operator Interface for changing timer/counter/register values. 2 x 16 character LCD backlight display and 6 operation keys. No stored messa ging, PLC stores messages. |
| IC200MDL741 | Output 24VDC POS LOGIC 0.5 amp per point(1 group of 16) with ESCP 16 points |
| IC200CPU001 | CPU 34K user configurable user memory, 1.80MSEC/K Boolean one RS232 and one RS485 serial ports |
| IC200MDD846 | Mixed 120VAC POS LOG input group 8 point / isolated 2 amp relay output 8 point. |
| IC200MDD850 | MIXED OUTPUT RELAY 2.0A PER PT ISOLATED 8PT / INPUT 240VAC ISO 4PT |
| IC200PWR102CA | Conformal Coated POWER SUPPLY WITH EXPANDED 3.3VDC 120/240VAC INPUT |
| IC200MDL640CA | INPUT MODULE 24VDC POS/NEG GRP 16PT - CONFORMAL COATED |
| IC200MDL940 | Output relay 2.0 amps per point isolated form A, 16 points |
| IC200MDL240 | Input 120VAC (2 group of 8) 16 point. |
| IC200MDD847 | Mixed 240VAC input group 8 point / isolated 2 amp relay output 8 point. |
| IC200MDD848 | Mixed output 120VAC 0.5A per point isolated 8 point / input 120VAC group point |
| IC200MDL241 | Input 240VAC (2 group of 8) 16 point. |
| IC200MDD849 | Mixed output relay 2.0 amp per point isloated 8 point / input 120VAC isolated 8 point |
| IC200MDL930CA | OUT RELAY 2A ISO FORM A 8PT conf coat |
| IC200ETM001CA | EXPANSION TRANSMITTER CONFORMAL COATED |
| IC200MDL644 | Input 5/12VDC POS/NEG logic (4 groups of 8) 32 points |
| IC200DTX400 | Operator Interface with up to 200 stored messages. 2 x 16 character LCD backlight display and 6 function keys. Powered via 15 pin SNP Port. |
| IC200MDL632 | Input 125VDC POS/NEG logic isolated 16 point |
| IC200MDD851 | MIXED OUTPUT 12/24VDC POS GRP 16PT / INPUT 5/12VDC POS/NEG GRP 16 PT |
| IC200CHS102 | I/O interposing disconnect style, 16 point expansion |
| IC200CHS122 | I/O interposing fuse style 16 point expansion |
| IC200MDL331 | Output 120VAC 2 amps per point isolated 8 points |
| IC200MDL243 | Input 120VAC isolated 16 point. |
| IC200MDD844 | Mixed 24VDC POS LOG input group 16 point / 24 VDC output 16 point. |
| IC200MDD840 | Mixed 24VDC POS LOG input group 20 point / output relay 2.0 amp per point 12 point |
| IC200MDL650 | Input 24VDC POS/NEG logic (4 groups of 8) 32 points |
| IC200MDL744 | Output 5/12/24VDC NEG LOGIC 0.5A per point (2 groups fo 16) 32 points |
| IC200MDD842 | Mixed 24VDC POS LOG input group 16 point / output 24VDC 0.5 amp with ESCPoutput 16 point. |
| IC200ALG230 | Analog input 12 bit voltage/current 4 channel |
| IC200CPU002 | CPU 42K user configurable user memory, 1.80MSEC/K Boolean one RS232 and one RS485 serial ports |
| IC200MDL730 | Output 24VDC POS LOGIC 2.0 amp per point(1 group o 8) with ESCP 8 points |
| IC200DTX450 | Operator Interface with up to 200 stored messages. 2 x 16 character L CD backlight display and 6 function keys. |
| IC200MDL750 | Output 12/24VDC POS LOGIC 0.5A per point (2 groups of 16) 32 points |
| IC200MDL635CA | IN 48VDC POS/NEG GRP 16PT conf coat |
| IC200MDL940CA | OUTPUT RELAY 2A ISO FORM A 16PT MODULE CONFORMAL COATED |
| IC200MDL143CA | IN 120VAC ISOLATED 8 PT Conf Coated |
| IC200MDL741CA | OUT 24VDC POS .5A ESCP 16PT CONF COAT |
| IC200MDL330 | Output 120VAC 0.5 amps per point isolated 16 points |
| IC200MDL636 | Input 48VDC POS/NEG logic (4 groups of 8) 32 points |
| IC200MDL650CA | Conformal coated. Input 24VDC POS/NEG logic (4 groups of 8) 32 points |
| IC200MDL244CA | 240VAC ISOLATED 8 POINT INPUT MODULE, CONFORMAL COATED |
| IC200MDD841 | Mixed 24VDC POS LOG input group 20 point / output 24VDC output 12 point. supports high speed counter/PWM/PT |
| IC200MDL750CA | Conformal Coated Output 12/24VDC POS LOGIC 0.5A per point (2 groups of 16) 32 points |
| IC200MDL240CA | Input 120VAC (2 group of 8) 16 point. |
| IC200DBI001 | Remote I/O DeviceNet network interface unit |
| IC200PNS002 | PROFINET Scanner (PNS) module interfaces a remote node of VersaMax modules to a PROFINET IO Controller. Two 100Mbps Multi-Mode fiber (MMF) ports. Requires Proficy Machine Edition 7.0. |
| IC200PNS001 | PROFINET Scanner (PNS) module interfaces a remote node of VersaMax modules to a PROFINET IO Controller. Two 10/100 Mbps copper interfaces. Requires Proficy Machine Edition 7.0 |
| IC200CHS101 | I/O interposing disconnect style, 16 point |
| IC200MDL742 | Output 24VDC POS LOGIC 0.5 amp per point(2 group of 16) with ESCP 32 points |
| IC200ALG322 | Analog output 12 bit +/-10VDC voltage 4 channel |
| IC200MDD849CA | Conformal coated mixed output relay 2.0 amp per point isloated 8 point / input 120VAC isolated 8 point |
| IC200ALG320 | Analog output 12 bit current 4 channel |
| IC200ALG321 | Analog output 12 bit voltage 0-10VDC 4 channel |
| IC200DTX650 | Operator Interface with up to 200 stored messages. 4 x 16 character L CD backlight display and 8 function keys. |
| IC200CHS121 | I/O interposing fuse style 16 point |
| IC200MDD844CA | Conformal Coated MIX 24VDC OUT .5A/IN 16/16PT |
| IC200PNS002CA | Conformal Coated. PROFINET Scanner (PNS) module interfaces a remote node of VersaMax modules to a PROFINET IO Controller. Two 100Mbps Multi-Mode fiber (MMF) ports. Requires Proficy Machine Edition 7.0. |
| IC200PNS001CA | Conformal Coated. PROFINET Scanner (PNS) module interfaces a remote node of VersaMax modules to a PROFINET IO Controller. Two 10/100 Mbps copper interfaces. Requires Proficy Machine Edition 7.0 |
| IC200CHS211 | VersaMax modular 16 point I/O Interposing relay base. Replaceable relays (8amps) and fused. Field terminals are removable. Relays are controlded by 24VDC 0.5A outputs from the VersaMax I/O module IC200MDL740 and MDL750. CHS211 supports one expansi |
| IC200CHS212 | VersaMax modular 16 point I/O Interposing relay expansion base. Replaceable relays (8amps) and fused. Field terminals are removable. Relays are controlded by 24VDC 0.5A outputs from the VersaMax I/O module IC200MDL740 and MDL750. CHS212 requires CHS |
| IC200SET001 | Ethernet to Serial Interface |
| IC200ALG320CA | ALG OUT 12B CUR 4CH - CONF COAT |
| IC200CMM020 | Modbus Master module for VersaMax Genius NIU. Module supports one RS-485 serial port. |
| IC200BEM002 | Profibus-DP slave |
| IC200GBI001 | REMOTE I/O Genius NETWORK INTERFACE UNIT |
| IC200BEM103 | DeviceNet Master |
| IC200ALG432 | Analog mixed 12bit, +/-10VDC 4 channel in and +/-10VDC 2 channel out |
| IC200ALG431 | Analog mixed 12bit, 0-10VDC 4 channel in and 0-10VDC 2 channel out |
| IC200ALG430 | Analog mixed 12bit, 4 current channel in and 2 current channel out |
| IC200PBI001 | Remote I/O Profibus DP network interface unit |
| IC200PKG001 | PLC starter kit CPU001 |
| IC200MDD841CA | Conformal coated mixed 24VDC POS LOG input group 20 point / output 24VDC output 12 point. Supports high speed counter/PWM/PT |
| IC200DTX850 | Operator Interface with up to 200 stored messages. 4 x 20 character L CD backlight display, 8 function keys and numeric keypad. |
| IC200ALG620 | Analog input 16 bit RTD, 4 channel |
| IC200CPU005 | CPU 128K user configurable user memory, 0.8MSEC/K Boolean one RS232 and one RS485 serial ports |
| IC200CHS111 | I/O interposing relay style, relay 8 amps isolated, fused 16 points |
| IC200BEM104 | VersaMax AS-Interface Network Master to interface a VersaMax PLC or I/O NIU to AS-Interface network. The AS-i module supports 31 slave devices. |
| IC200CHS112 | I/O interposing relay style, relay 8 amps isolated, fused 16 points expansion unit |
| IC200ALG331 | Analog output 16 bit voltage/current 4 isolated channels |
| IC200ALG260 | Analog input 12 bit voltage/current 8 channel |
| IC200GBI001CA | Conformal Coated REMOTE I/O Genius NETWORK INTERFACE UNIT |
| IC200BEM002CA | Profibus-DP slave Conformal Coated |
| IC200PBI001CA | Remote I/O Profibus DP network interface unit conformal coated. |
| IC200ALG620CA | ANALOG INPUT 16 BIT RTD 4CH CONFORMAL COATED |
| IC200CPU005CA | Conformal coated CPU 128K user configurable user memory, 0.8MSEC/K Boolean one RS232 and one RS485 serial ports |
| IC200BEM003 | Profibus Master Module. Compatible with CPUs (IC200CPU005 and CPUE05 only) and Profinet Network Interface only (IC200PNSxxx). |
| IC200ALG630 | Analog input 16 bit Thermocouple, 7 channel |
| IC200ALG265 | Analog input 15 bit 0 - 10VDC voltage, 15 channel, TUV approved. |
| IC200ALG266 | Analog input 15 bit, 4-20mA, current, 15 channel. TUV approved. |
| IC200ALG264 | Analog input 15 bit current 15 channel |
| IC200ALG262 | Analog input 15 bit current differential 8 channel |
| IC200ALG261 | Analog input 15 bit differential voltage 8 channel |
| IC200ALG263 | Analog input 15 bit voltage 15 channel |
| IC200ALG325 | Analog output 13 bit voltage 8 channel |
| IC200ALG326 | Analog Output, 13 Bit Current, 8 Channel |
| IC200EBI001 | Remote I/O Ethernet network interface unit |
| IC200ALG260CA | ALG IN 12B VOL/CUR 8CH - CONF COAT |
| IC200ALG331CA | ANALOG OUTPUT 16 BIT VOLTAGE/CURRENT ISOLATED 4 CH CONFORMAL COATED |
| IC200ALG326CA | Conformal Coated Analog Output, 13 Bit Current, 8 Channel |
| IC200ALG240 | Analog input 16 bit voltage/current 8 isolated channels |
| IC200ALG264CA | Conformal Coated Analog input 15 bit current 15 channel |
| IC200ALG240CA | ANALOG INPUT 16 BIT VOLTAGE/CURRENT ISOLATED 8 CH CONFORMAL COATED |
| IC200ALG262CA | ALG IN 15B CURR DIF 8CH CONF COAT |
| IC200ALG327 | Analog output 13 bit voltage 12 channel |
| IC200ALG328 | Analog Output, 13 Bit, Current, 12 Channel |
| IC200PKG010 | VersaMax Modular PLC starter kit. Kit includes CPUE05. |
| IC200CPUE05 | CPU 128K user configurable user memory, 0.8MSEC/K Boolean one RS232, one RS485 serial ports and Ethernet port 10Mbit base T. |
| IC200CPUE05CA | Conformal coated CPU with built-in Ethernet 10Mbits, one RS 232 and one RS 485 port. |
| IC676CBLPBB020 | IP67 Profibus Cordset - 2 Meters |
| IC676CBLPNFLY050 | VersaMax IP IP67 PROFINET Cordset with Flying Leads - 5 meters |
| IC676CBLPBF100 | IP67 Profibus Cordset - 10 Meters - Female Connector w/Leads |
| IC676CBLPBM100 | IP67 Profibus Cordset - 10 Meters - Male Connector w/Leads |
| IC676CBLPBB050 | IP67 Profibus Cordset - 5 Meters |
| IC675PCB002 | Profibus Cordset 2.0 Meters |
| IC676CBLPNRJ45050 | VersaMax IP IP67 PROFINET Cordset with RJ45 Connector - 5 meters |
| IC676CBLPBB100 | IP67 Profibus Cordset - 10 Meters |
| IC676CBLPNFLY100 | VersaMax IP IP67 PROFINET Cordset with Flying Leads - 10 meters |
| IC676CBLPNRJ45100 | VersaMax IP IP67 PROFINET Cordset with RJ45 Connector - 10 meters |
| IC676CBLPNRJ45100A | VersaMax IP IP67 PROFINET Cordset with RJ45 Connector - 10 meters |
| IC675PCB005 | Profibus Cordset 5.0 Meters |
| IC676ACC005 | Profibus Network Tee |
| IC675PCB010 | Profibus Cordset 10.0 Meters |
| IC677DBI008 | VersaMax IP Modular expansion base with (8) 24VDC inputs. Module requires IC677PNS001 PROFINET or IC677PBI001 PROFIBUS network interface unit. |
| IC677DBO085 | VersaMax IP Modular expansion base with (8) 24VDC outputs. Module requires IC677PNS001 PROFINET or IC677PBI001 PROFIBUS network interface unit. |
| IC677DBM442 | VersaMax IP Modular expansion base with (4) 24VDC inputs and (4) 24VDC outputs (2 amp). Module requires IC677PNS001 PROFINET or IC677PBI001 PROFIBUS network interface unit. |
| IC677ABI004 | IP67 Analog Input Expansion Base, 4 channels. Configurable, per channelcurrent measuring ranges 0 mA to 20 mA, 4 mA to 20 mA, +/-20 mA; voltage voltage measuring ranges:0 V to 10 V, ą10 V, 0 V to 5 V, +/-5 V. Module requires IC677PNs001 PROFINET or |
| IC677ABO004 | IP67 Analog Output Expansion Base, 4 channels. Configurable, per channelcurrent output ranges:0 mA to 20 mA, 4 mA to 20 mA;voltage output ranges:0 V to 10 V, +/-10 V, 0 V to 5 V, +/-5 V. Module requires IC677PNS001 PROFINET or IC677PBI001 PROFIBUS n |
| IC676PBI008 | IP67 Input Block - 24 VDC Positive Logic - 8 Pt - Profibus |
| IC676PBM442 | IP67 Mixed Block - 24 VDC Positive Logic - 4 In/4 Out 2A - Profibus |
| IC677PBI001 | Profibus VersaMax IP Modular local bus master with (8) 24VDC inputs. |
| IC677PNS001 | VERSAMAX IP PROFINET BUS COUPLER, MODULA |
| IC676PBO082 | IP67 Output Block - 24 VDC Positive Logic - 8 Pt 2A - Profibus |
| IC676PBI016 | IP67 Input Block - 24 VDC Positive Logic - 16 Pt - Profibus |
| IC675PDI081 | Profibus Station IP67 24VDC Positive Logic 8 Inputs |
| IC675PDO081 | Profibus Station IP67 24VDC Positive Logic 8 Outputs 0.5A |
| IC675PDM841 | Profibus Station IP67 24VDC Positive Logic 8 Inputs / 4 Outputs 2. 0A |
| IC675PDI161 | Profibus Station IP67 24VDC Positive Logic 16 Inputs |
| IC675PDM881 | Profibus Station IP67 24VDC Positive Logic 8 Inputs / 8 Outputs 0. 5A |
| IC675PDO161 | Profibus Station IP67 24VDC Positive Logic 16 Outputs 0.5A |
| IC220MDL220 | INPUT, 120VAC, 1 PT (REQUIRES 1 IC220TBK083) |
| IC220MDL230 | INPUT, 230VAC, 1 PT (REQUIRES 1 IC220TBK083) |
| IC220MDL761 | OUTPUT, 24VDC NEGATIVE LOGIC 0.5A, 2PT (REQUIRES 1 IC220TBK082) |
| IC220MDL930 | OUTPUT, RELAY 3.0A, 1PT (REQUIRES 1 IC220TBK085) |
| IC220TBK062 | I/O TERMINAL STRIP W/DUAL SHIELD, 6 POSITION SPRING STYLE-QTY 5 |
| IC220TBK061 | I/O TERMINAL STRIP W/SHIELD, 6 POSITION SPRING STYLE, QTY 5 |
| IC220TBK123 | I/O TERMINAL STRIP, 12 POSITION SPRING STYLE, OUTPUT, QTY 10 |
| IC220MDL643 | INPUT, 24VDC POSITIVE LOGIC, 8PT (REQUIRES 4 IC220TBK082) |
| IC220MDL751 | OUTPUT, 24VDC POSITIVE LOGIC 0.5A, 2PT (REQUIRES 1 IC220TBK082) |
| IC220PWR101 | POWER TERMINAL, 120VAC (REQUIRES 1 IC220TBK204) |
| IC220PWR201 | POWER TERMINAL, 230VAC (REQUIES 1 IC220TBK204) |
| IC220MDL721 | OUTPUT, 24VDC POSITIVE LOGIC 2.0A, 2PT (REQUIRES 1 IC220TBK082) |
| IC220MDL665 | VersaPoint Input Module, 24 VDC Positive Logic, 8 Points, High Density 12mm width, Connection method 1-wire, terminal strips included. |
| IC220TBK122 | I/O TERMINAL STRIP, 12 POSITION SPRING STYLE, INPUT, QTY 10 |
| IC220MDD850 | INPUT, THERMISTOR, 1 PT (REQUIRES 1 IC220TBK061) |
| IC220MDL350 | OUTPUT, 12-253VAC 0.5A, 1 PT (REQUIRES 1 IC220TBK084) |
| IC220MDL753 | OUTPUT, 24VDC POSITIVE LOGIC 0.5A, 8PT (REQUIRES 4 IC220TBK082) |
| IC220MDL765 | VersaPoint Output Module, 24 VDC Positive Logic, 8 Points, 500 mA, Short-circuit and overload protected, High Density 12mm width, Connection method 1-wire, terminal strips included. |
| IC220MDL642 | INPUT, 24VDC POSITIVE LOGIC, 4PT (REQUIRES 1 IC220TBK122) |
| IC220MDL752 | OUTPUT, 24VDC POSITIVE LOGIC 0.5A, 4PT (REQUIRES 1 IC220TBK123) |
| IC220ALG220 | ANALOG IN, 15 BIT, VOLTAGE/CURRENT, 2CH (REQUIRES 1 IC220TBK061) |
| IC220MDL644 | INPUT, 24VDC POSITIVE LOGIC, 16PT (REQUIRES 4 IC220TBK122) |
| IC220ALG321 | ANALOG OUT, 16 BIT, VOLTAGE, 1CH (REQUIRES 1 IC220TBK061) |
| IC220ALG320 | ANALOG OUT, 16 BIT, VOLTAGE/CURRENT, 1CH (REQUIRES 1 IC220TBK203) |
| IC220MDL940 | OUTPUT, RELAY 3.0A, 4PT (REQUIRES 4 IC220TBK085) |
| IC220ALG330 | VersaPoint Analog Output Module, 12 Bit, 2 Channel, Voltage 0-10V +/- 10V, Current 0-20mA 4-20mA +/-20mA, 2-wire connection, HD 12mm width, terminal strips included. |
| IC220MDL754 | OUTPUT, 24VDC POSITIVE LOGIC 0.5A, 16PT (REQUIRES 4 IC220TBK123) |
| IC220MDD841 | ABSOLUTE ENCODER INPUT, 4IN/4OUT 24VDC (REQUIRES 1 IC220TBK202) |
| IC220ALG230 | VersaPoint Analog Input Module, 12 Bit, 4 Channel, Current 0-20mA 4- 20mA, 250µs update, 2-wire connection, HD 12mm width, terminal strips included. |
| IC220ALG231 | VersaPoint Analog Input Module, 12 Bit, 4 Channel, Voltage 0-10Volt +/- 10V, 250µs update, 2-wire connection, HD 12mm width, terminal strips included. |
| IC220ALG630 | ANALOG IN, 16 BIT THERMOUCOUPLE, 2CH (REQUIRES 1 IC220TBK061) |
| IC220MDD843 | VersaPoint Pulse Output module, 2 Channel, 5/24 VDC, PWM (pulse width modulation), Frequency generator, Single shot, Pulse direction signal for stepper control. |
| IC220ALG620 | ANALOG IN, 16 BIT RTD, 2CH (REQUIRES 1 IC220TBK061) |
| IC220MDD840 | HIGH SPEED COUNTER INPUT, 1IN/1OUT 24VDC (REQUIRES 1 IC220TBK203) |
| IC220EBI002 | VersaPoint Ethernet Standard Network Interface Unit. Supports Modbus TCP network communications. Requires (1) IC220TBK087. |
| IC220ALG322 | ANALOG OUT, 13 BIT VOLTAGE, 2CH (REQUIRES 1 IC220TBK061) |
| IC220MDD842 | INCREMENTAL ENCODER INPUT, 4IN/4OUT 24VDC (REQUIRES 1 IC220TBK202) |
| IC220BEM232 | RS-232 Communications Module interfaces serial I/O devices to a VersaPoint I/O Station. Requires a NIU that supports PCP services, not compatible with IC220EBI002 Ethernet NIU. Supports the following protocols Transparent, End-to-end, Dual buffer, |
| IC220BEM485 | RS-485 Communications Module interfaces serial I/O devices to a VersaPoint I/O Station. Requires a NIU that supports PCP services, not compatible with IC220EBI002 Ethernet NIU. Supports the following protocols Transparent, End-to-end, Dual buffer, |
| IC220PNS001 | PROFINET Scanner, 2 Copper Ports, with 8 Inputs and 4 Outputs, terminal strips included, NIU for VersaPoint and VersaSafe modules. |
| IC220PNS002 | PROFINET SCANNER FIBER PORT |
| IC220PBI002 | Profibus DP V1 NIU for VersaPoint I/O |
| IC220PBI001 | PROFIBUS-DP NETWORK INTERFACE UNIT (REQUIRES 1 IC220TBK087) |
| IC220DBI001 | DEVICENET NETWORK INTERFACE UNIT (REQUIRES 1 IC220TBK201) |
| IC220ALG221 | Analog Input module, 8 channels, voltage/current. 15bit resolution. Requires 4 out of the 5 IC220TBK062 (5 in a pack) terminal strips. |
| IC220EBI001 | Ethernet Network Interface Unit (REQUIRES 1 IC220TBK087) |
| IC220PWR301 | Logic Power Terminal, UL power is amplified if max. UL load of the NIU is reached, e.g. in case of many safety modules. |
| IC220SDL543 | SAFE INPUT, 24VDC POSITIVE LOGIC, 8PT SI |
| IC220SDL752 | SAFE OUTPUT, 24VDC POSITIVE LOGIC 2 A, 4 |
| IC220SDL753 | SAFE OUTPUT, 24VDC POSITIVE LOGIC 3 A, 8 |
| IC220SDL953 | SAFETY LOGIC MODUL, SAFE OUTPUT, 24VDC P |
| IC220SDL840 | SAFE OUTPUT, RELAY 4A, 4PT, WITH 2 CONTA |
| IC220SDL544 | "SAFE INPUT, 24VDC POSITIVE LOGIC, 16PT " |
| IC220SDL963 | "ENHANCED SAFETY LOGIC MOD, 8 SAFE OUT, 24V POSITIVE LOGIC" |
| IC670PBI001 | CPU, 96 MHz, 12K Discrete I/O, 1M byte fixed user memory |
| IC752DFT000-DD | IHM |
| IC693CPU352 | CPU 352 Module |
| IC660TSA100 | Terminal Assembly for IC660BBA024 |
| 12M G12-1300 PRO | FIBEROPTIC MODULE PROFIBUS CLASS A |
| IC670MDL930 | RELAY OUT 8PT ISOLATED |