The Lenze 8200 Vector is a reliable and widely used inverter drive, but like any industrial equipment, it can encounter faults over time. At DDPartsSolution, we help you quickly identify and resolve these issues — or offer tested replacements when needed.

This guide explains the most common Lenze 8200 faults, their probable causes, and recommended actions to get your drive back up and running.

Common Lenze 8200 Fault Codes and Solutions

Error Code F01 – Overcurrent

Cause: Short circuit, motor overload, or incorrect motor parameters.
Solution:

• Check motor cables and connections

• Review and adjust motor parameter settings

• Inspect for mechanical blockage

Error Code F02 – Overvoltage

Cause: Excessive input voltage or rapid deceleration.
Solution:

• Install braking resistor if needed

• Adjust deceleration time

• Monitor incoming line voltage

Error Code F05 – Undervoltage

Cause: Drop in input voltage supply.
Solution:

• Check power supply stability

• Inspect wiring and input terminals

• Verify line voltage meets specs

Error Code F13 – Overtemperature

Cause: Ventilation issues or excessive load.
Solution:

• Ensure sufficient airflow

• Clean drive vents

• Reduce ambient temperature or load

Error Code F20 – Motor Overtemperature

Cause: Long operation at high torque or inadequate cooling.
Solution:

• Let motor cool down

• Check for fan function or cooling issues

• Adjust motor duty cycle

Error Code F36 – EEPROM Error

Cause: Faulty parameter memory or power interruption during programming.
Solution:

• Reload factory parameters

• Replace EEPROM module if issue persists

Preventive Maintenance Tips

To avoid recurring Lenze drive faults, follow these best practices:

• Keep drive environment dust-free and cool

• Use surge protection on power lines

• Regularly check for loose connections

• Update firmware when available

• Monitor motor load and runtime

Replacement Lenze 8200 Drives Available at DDPartsSolution

When repair is not an option, we offer fully tested and warranty-backed Lenze 8200 Vector drives ready to ship.

Popular Models:

• E82EV371K2C – 3.7kW Vector Drive

• E82EV552_4C – 5.5kW Model

• E82EV551_2C – 5.5kW, 230V

• E82EV251_2C – 2.5kW Version

Why Buy from DDPartsSolution?

✅ New and tested-used Lenze drives
🌍 Global shipping from the USA
🔧 Wide inventory of industrial automation parts
⚡ Expert help with fault code troubleshooting and compatibility
🛡️ Warranty included

Buy Lenze 8200 Here 

Need urgent support or a quick replacement for your Lenze 8200 drive?
Contact DDPartsSolution – your trusted partner for Lenze and other top industrial brands.